Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB: 914-6 Trans Cover Rear PN 914.301.031.02
Posted by: johnhora Oct 8 2018, 11:38 AM
Looking for a 914-6 Rear Transmission Cover PN 914.301.031.02
Needed for a original 914-6 project.
Show me what you have.
Thanks..
Posted by: 914Sixer Oct 8 2018, 11:56 AM
I think AA has some NOS -4's that could be made to work.
Posted by: johnhora Oct 8 2018, 12:06 PM
Thanks Mark...
this part is a unique beast as you know..
real 914-6 so don't want any mods...or I would throw one of the side shifters I have in it.
I have a few 4 tail shifters also.
Thanks for the reply!
Posted by: db9146 Oct 8 2018, 12:19 PM
Thanks Mark...
this part is a unique beast as you know..
real 914-6 so don't want any mods...or I would throw one of the side shifters I have in it.
I have a few 4 tail shifters also.
Thanks for the reply!
Just a question....after reading again, were the tail housings for a tail-shifter different between a -4 and a -6?
Posted by: IronHillRestorations Oct 8 2018, 12:33 PM
I have one, but it's not as pristine as you may like. PM sent
The 6 is unique to 6's
Posted by: mepstein Oct 8 2018, 12:41 PM
Thanks Mark...
this part is a unique beast as you know..
real 914-6 so don't want any mods...or I would throw one of the side shifters I have in it.
I have a few 4 tail shifters also.
Thanks for the reply!
Just a question....if its all about originality, why move from the tail-shifter as that's the way that all of them would have come unless you are talking about the 916s, I believe, correct?
After reading again, were the tail housings for a tail-shifter different between a -4 and a -6?
Yes. The linkage too. There are a lot of unique parts to a 6 that aren’t evident without really looking at the details. For example, the torsion rods on a 6 engine lid are lighter since it didn’t have a rain tray etc etc.
Posted by: aturboman Oct 8 2018, 12:56 PM
PM sent; I have all these unique shift / trans parts from my low mileage 6 that is getting a 916 trans. instead.
Posted by: johnhora Oct 8 2018, 01:22 PM
replied to the PMs...thanks
Posted by: Towarish Oct 8 2018, 09:01 PM
Looking for a 914-6 Rear Transmission Cover PN 914.301.031.02
Needed for a original 914-6 project.
Show me what you have.
Thanks..
there is one fs in germany
https://www.ebay-kleinanzeigen.de/s-anzeige/porsche-914-6-getriebedeckel-original/949467869-223-4617
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)