Printable Version of Topic

Posted by: joint-chiefs-of-stuff Oct 18 2018, 02:54 PM

Nice set of four 914 Riviera Wheels. All in very good used condition. No outer rim edge flaws or nicks.
Marked 15 X 4.5, rim width measures 5.5 inches, offset measures a bit over 4 inches hub mounting surface to rim.
Includes 3 Supreme Wheel center cones, 16 lug bolts, and 4 Porsche crest valve stem caps. See photos.

$250 o.b.o. plus shipping, paid via PayPal.

Thanks!

Brad Sokol
860.460.2582
bfsokol@yahoo.com
Text, email are best. But feel free to leave a voice message.

[attachmentid=671
481][attachmentid
=671485][attachme
ntid=671489]


Attached image(s)

Posted by: thelogo Oct 18 2018, 08:23 PM

Posted by: Blue6 Oct 18 2018, 09:28 PM

Wow logo, that was real constructive criticism.

Posted by: Chi-town Oct 18 2018, 10:22 PM

But he didn't comment on pricing

Posted by: porschetub Oct 18 2018, 10:38 PM

No that's normal,however 4.5"...didn't know they made them in that size,someone correct me.

Posted by: euro911 Oct 18 2018, 11:43 PM

I'll have to

Posted by: 914_teener Oct 19 2018, 01:08 PM

I'll comment constructively for the seller

I had "Rivs" on my car for many years without the proper backset. The tires rubbed but they were 205's with pulled fenders. So really no problem.

If the stamp is 4.5 for the backset and not the rims width then they are the correct backset for a 914. It is hard to tell from the pictures but, it appears they are the correct backset.

So it would be helpful for the seller to take a tape measure across the width of the rim to affirm the size.

And I'll assure everyone that it is no laughing matter if I was the seller.

Hopes this helps the OP sell their rims.

Posted by: Chris914n6 Oct 19 2018, 01:46 PM

^^ 15x4.5 is wheel size. No offset stamp seen.

Stock wheels are 15x5.5 et40, so finding a buyer on a 914 forum will be tough. I'd put them on SAMBA as a VW wheel and do some more pricing research. $500 is stock Fuchs range....

Posted by: joint-chiefs-of-stuff Oct 19 2018, 01:47 PM

Thanks Teener, appreciate this advice! I hope the photos below show properly: a wheel width measure and a backset measure (a bit more that 4 in.) from hub mating surface up to a folding ruler sitting on the wheel rim.

Posted by: euro911 Oct 19 2018, 03:24 PM

Yeah, those are standard VW, Bug, Ghia Squareback, etc.

... I'd place an ad on the Samba site. I've sold several sets of Rivieras and 8-spoke Empis with the VW offset there over the years, however, you might have them for a while ... a set of 4 brand new ones sell for about $400.

GLWTS

Posted by: thelogo Oct 19 2018, 08:42 PM

https://youtu.be/zhxayTf1vVs




I APOLOGIZE IM WAY OUTTA LINE

Posted by: Coondog Oct 19 2018, 10:17 PM

Here’s a good rule for you.

# If you don’t have anything constructive to say then Shut The Fuck Up....

Posted by: rhodyguy Oct 20 2018, 08:06 AM

Exactly.

Posted by: joint-chiefs-of-stuff Jan 6 2019, 10:10 PM

SOLD