Koni "Special D" rear shocks complete w/ top hats but no springs $75 SOLD!
Green "no name" springs for rear $25 (I don't know the rate, were in a V8 conversion) SOLD!
Stock rear trailing arms $65
Stock rear calipers with brand new pads $150 SOLD
Stock front calipers $75 (in good shape but need cleaned)
Front and rear shift rods w/ front under shifter joint, center u-joint, and rear connector for side shift $50 SOLD
Rear 5 lug re-drilled rotors - $30 (smooth but could use resurface)
Stock 914-4 Hubs and stubs w/ nuts and washers & rotors $40
Metal Expansion tank $20 (in good shape but will need repaint)
Filler neck $20 (in good shape but will need repaint)
Gas Tank strap assembly (Both Straps, bolt / T-nut, plastic piece) $20 SOLD!
PM me an email address for pics.
I'm in Anaheim, CA for local pick up
I will ship on your dime.
Add 3% for PayPal fees
Edit: Lower prices
Bump for lower prices!
Do you have the top nuts and spring holders for the Koni shocks?
Bump! If you're interested make me an offer!
The stock 914 hubs...are they the earlier hubs of consistent thickness? I understand they’re better for redrilling for five lugs? Or am I misinformed?
Could you post or PM a pic of the springs pls?
Local buyer, Are the 5 lug redrilled rotors fronts or rears? Pic please... thanks!
@http://www.914world.com/bbs2/index.php?showuser=21573 - they are stock hubs, there is no advantage to the early hubs with the extra bosses for the 5 lug conversion unless you're racing the car and then you should go to the 911 hubs.
@http://www.914world.com/bbs2/index.php?showuser=9463 - they are rear
Thanks, was looking for fronts.
2nd dibs on the rear springs.
PM sent re: springs
Bump! Still cleaning up before I part out the 75'!
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)