Printable Version of Topic

Posted by: nditiz1 Oct 20 2018, 09:38 AM

Anybody have a 911 fan housing they can part with, 245mm?

Thanks

Posted by: mb911 Oct 20 2018, 12:02 PM

Do you just need yours fixed? I have a couple cores I could weld for you or send me yours?

Posted by: PanelBilly Oct 21 2018, 10:47 AM

Big $$$ for these. I’d take Ben’s offer up and I bet it will save you a bundle.

Posted by: BK911 Oct 21 2018, 06:20 PM

What years are the 245mm?
I have a few 2.2 and 2.4 ones.
What are they worth?

Posted by: mb911 Oct 21 2018, 06:52 PM

245mm was on most year's.. The smaller 226 were sc's, 930..

I get $200 for just welding them on the customers housing.. Then the core is worth at least $150..

Posted by: nditiz1 Oct 21 2018, 08:57 PM

245mm was 69 to 77, the housing has this part number
901 106 101 5R

Or

930 106 102 0R

I'm looking for either.

Posted by: mb911 Oct 22 2018, 06:10 AM

Here you go. Both of them have a little corrosion but both could be used as is and no welding required unless you want .. That's an hourly charge.

$250 either one plus shipping as is.

Posted by: mb911 Oct 22 2018, 06:11 AM

Posted by: mb911 Oct 22 2018, 06:11 AM

Posted by: mb911 Oct 22 2018, 06:12 AM

Posted by: Luke M Oct 22 2018, 11:28 AM

Just make sure the housing/alt mating surface depth matches your old housing. Ben's pics shows two housings but look closer at the mating surface thickness. I have a chart someplace and will post once I locate it.

BTW: Ben has repaired a few 911 housings for me and came out great.