Hi,
Mine are too corroded to put back into the car, does anyone have a pair?
Thank you,
CTC911CTC
Please post a picture of what you need and I will check my spare parts
Do you mean the little clips that hold the pins at the cable ends,
or the clips that hold the end of the brake hose, those you can find at your local FLAPS
If you are talking about the springs underneath the pins on the caliper that hold the pads in place, I just did this. Porsche dealers have new ones you can buy online.
Did you check with http://www.pmbperformance.com/catalog.html
Apologies! None of these - the "Spreader Clips" that sit on top of the brake pads and push them away from the disk when the brake pressure is off.
Yes, I also called them - they rebuilt all of the calipers - AND THEY LOOK AWESOME!!!! But alas, they have no clips.
Alright, I will look at the Porsche online catalog. THANK YOU!
Thank you Kevin - Will do!
Cary, I have two sizes. Do you need the smaller or larger ones?
Since he is asking about rear caliper springs, I would assume the smaller ones.
Part # 311-615-269
2+1/16" long 1+11/16" wide or 53mm x 43mm
I have 7 replated parts that need new rivets.
https://www.pelicanparts.com/cgi-bin/ksearch/PEL_search_2016.cgi?command=DWsearch&description=311-615-269-OEM
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)