Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ Anyone have any front end sheetmetal hanging around?

Posted by: amfab Nov 26 2018, 12:42 PM

I was sandblasting the other day and found a couple small holes and a thin spot up near the bumper mount on the passengers side. After blasting back to solid metal it looks like this (see below). Its the only problem area I have across the front.

I can fabricate the patch, but there are a couple of weird angels so I thought someone may have this area on some old clip laying around.

Thanks in advance

-Andrew
Attached Image

Posted by: Beach914 Nov 26 2018, 02:02 PM

Frankencarcass has a decent section if you want it.

$25 plus shipping or come down and mark up what you want and we'll cut it.

The chassis is in Orange.

Attached Image

Posted by: amfab Nov 27 2018, 12:23 PM

QUOTE(Beach914 @ Nov 26 2018, 12:02 PM)

Frankencarcass has a decent section if you want it.

$25 plus shipping or come down and mark up what you want and we'll cut it.

The chassis is in Orange.

Attached Image

If you could cut this part out (see attached) and send it up that would be great. I will PM you,.

Thank you
-Andrew

Posted by: majkos1 Dec 3 2018, 02:38 PM

Andrew,
If the other guy doesn't come thru, I have this piece available.