914World.com [Powered by Invision Power Board]

Posted by: dave29 Dec 1 2018, 12:56 PM

I have a 3 sets of OEM 914-6 exhausts and will be selling them. For now i've selected one set. Before I post a price, what is the going rate? Great condition. I sold my 6 is the only reason i'm selling them.
Thank you.
$1600 plus shipping and insurance. Please PM me if you're interested.
Thank you.
New lower price
$1200 plus shipping and insurance.

Attached thumbnail(s)

Posted by: Tdskip Dec 1 2018, 12:58 PM

I believe Ben makes these new so that, while not identical, may be a good reference point. Maybe check closed eBay sold data as well

I am interested in a set (depending on the pricing).

Posted by: mb911 Dec 1 2018, 01:33 PM

Those heat boxes looked perforated? If that is the case $700 if they are not I would say 12-1500. It's hard to say.. I sell mine for $1950 and they 100% stainless. Though are not own stampings. I did buy a used set of own ones to rebuild for $500 .. Then fixed them and will likely sell for about 1100 when I am done with them. So there you have it. All kinds perspective.

Posted by: dave29 Dec 1 2018, 01:36 PM

Perforated as in holes in the heat portion??

Posted by: dave29 Dec 1 2018, 01:52 PM

Does this help or is there a specific area that you can see that I cannot? Please let me know and i'll be happy to take more pictures. The next 2 sets that I will be selling have perforations or holes in the heat area.

Attached thumbnail(s)

Posted by: TheCabinetmaker Dec 1 2018, 04:11 PM

I think you are bending the rules here. As stated above, all ads must have a price. Please abide by the rules.

Posted by: Steve Dec 1 2018, 04:40 PM

You can buy new ones from Stoddard. I would guess 50% of the new price depending on condition.
https://www.stoddard.com/91421100500-sic.html

Posted by: jrblackbox Dec 1 2018, 04:45 PM

Do you have any mufflers available for sale?

Posted by: dave29 Dec 1 2018, 05:19 PM

Price has been added.
On mufflers, no, sorry I do not have any.
Thank you

Posted by: mb911 Dec 1 2018, 05:21 PM

Yes those are rust pin holes or perforations in the box..

Posted by: dave29 Dec 1 2018, 05:24 PM

Funny, I tried to stick a toothpick in them and couldn't.

Posted by: dave29 Dec 1 2018, 09:27 PM

This exhaust does not have any pinhole's in it at all!!!! I asked about the value of the exhaust, posted pictures taken from a cell phone, asked if any more detailed pictures were necessary and ended up with opinions and evidently competing with someone who manufactures a stainless exhaust who has many more posts than me.
The exhaust is no longer for sale. I will post for sale threads on my other two exhaust systems that have holes and pinholes and I will highlight those areas. I must say i'm pretty disappointed. I have many other OEM, NOS parts for a 914-6 but they will not be for sale on this forum.
Thank you.

Posted by: porbmw Dec 1 2018, 10:48 PM

will send PM

Posted by: mb911 Dec 2 2018, 05:14 AM

Dave,

My appoligies if it seemed I was trying to undersell you. That was not the case. I am only sharing what I see in the pictures.

Regardless when you posed the question as to value I commented. If you posted the price initially then no one except buyers would have commented.

I would suggest just start a clean thread with an asking price and all good.

Posted by: Tdskip Dec 2 2018, 12:02 PM

Dave - Ben's a good guy. He isn't trying to derail anything, people here will take his and other comments and observations in stride.

I'm in your potential pool of buyers (doing a 6 conversion) and it hasn't put me off.

Posted by: dave29 Dec 2 2018, 01:44 PM

Thank you for all the pm's and responses. It shows the strength of this forum for so many people to care about this and to take the time to share their thoughts. It's much appreciated.
Thank you all!
Best

Posted by: burton73 Dec 2 2018, 02:18 PM

Dave,

If a guy is building a real six car then he would want the factory look, part. There is room for everyone and the pair you showed looks very good. I have seen some real crap before that may leak Carmon Monoxide when the heat is on.

Ben is a very good guy and has helped the 914 community a lot.

I can not think of a better place for you to sell 914 parts than here. The price is right for seller as there is no costs. Something super rare I guess EBay or here for an extra post.

I personally look here every day. Pelican one time every 6 months and Ebay some time when I have too much time on my hands.

Bob B

Posted by: dave29 Dec 2 2018, 02:54 PM

All is good!

Posted by: dave29 Dec 2 2018, 06:18 PM

Ben.....thank you. We're good.

Posted by: Ferg Dec 3 2018, 12:51 PM

Just came to say that Dave is a great friend, I vouch for him as a seller.

Posted by: dave29 Dec 9 2018, 11:58 AM

New lower price
$1400 plus shipping and insurance.
Thank you

Posted by: dave29 Dec 13 2018, 08:35 AM

Bump

Posted by: dave29 Dec 21 2018, 07:01 AM

Price drop. $1200 plus shipping and insurance

Posted by: dave29 Jan 2 2019, 08:49 AM

Bump

Posted by: johnhora Jan 2 2019, 09:37 AM

Dave...sent you a pm...thanks

Posted by: pete000 Jan 2 2019, 11:55 AM

Thats a good buy !

Posted by: dave29 Jan 2 2019, 02:13 PM

Well, it gets better. I had a member PM me about a crack that looked like it was in the coating. He thought it might be a stress crack so I went back up to my garage and shined a flashlight directly into the area. A speck of light showed inside the exhaust so he was indeed right on his call.
I want full disclosure on selling items and that's why i'm updating this now. Because of this I will lower the price to $1100 plus shipping.
Thank you

Posted by: mb911 Jan 2 2019, 02:30 PM

QUOTE(dave29 @ Jan 2 2019, 12:13 PM)