Printable Version of Topic

Posted by: zephyrblau Dec 13 2018, 01:58 PM

as pictured. $100 + shipping. NO LONGER AVAILABLE

[attachmentid=678746] [attachmentid=678747][attachmentid=678748][attachmentid=678751][attachmentid=678
761] [attachmentid=678759][attachmentid=678760][attachmentid=678762][attachmentid=678
784] [attachmentid=678
788]


Attached image(s)

Posted by: DLewis Dec 13 2018, 04:44 PM

can't see a picture but I am interested in buying.
Can you send me a picture?
Dean

Posted by: zephyrblau Dec 13 2018, 04:50 PM

LMK if this works. the site software has been acting flakey today.

Posted by: DLewis Dec 13 2018, 05:43 PM

pm sent
Dean

Posted by: zephyrblau Dec 15 2018, 05:06 PM

$75 + shipping.

Posted by: bdstone914 Dec 15 2018, 08:44 PM

Can you post any better pictures? How many are there? 3 or 4 ? One looks to have a bent brake pedal. Do they have the brake rods and brake light switches. Do the pedals move freely?

Posted by: zephyrblau Dec 15 2018, 10:04 PM

QUOTE(bdstone914 @ Dec 15 2018, 06:44 PM)

Posted by: zephyrblau Dec 16 2018, 03:39 PM

there are 2 units. the straight clutch arm may be 911 type (?)


Attached image(s)

Posted by: DLewis Dec 16 2018, 09:13 PM

I take it my PM offer wasn't acceptable?
I did hear back from you.
Thanks, Dean

Posted by: zephyrblau Dec 17 2018, 12:49 PM

QUOTE(DLewis @ Dec 16 2018, 07:13 PM)

Posted by: bdstone914 Dec 20 2018, 06:26 AM

Here is what you have. One 914 pedal set and one 911 pedal set. See the straight clutch pedal ? That is a 911. Also note the difference in the slot lenght of the elongated holes for the floor pan studs.
It is also missing one of the bolts that attach the master.
The other 914 set is missing the brake rod and brake light switch. It may be the angle of the image but the brake pedal appears to be bent in the top image.
The 914 set has been modified.

Back on the 911 set. The brake light switch bracket was removed from the correct welded position and
bolted on to the back edge of the housing. Why ?Look at the lower picture.