"These fit 911T from 1969-1970 and 914-6 from 1970 through 1972
1991cc weber carbs, 8.6:1 compression standard 80mm bore. The piston length is 90.4mm,
compression height 34 plus 14.4 mm" This info, is to the best of my knowledge accurate, but is unverified.
This incomplete set of Mahle pistons and cylinders I purchased over 20 years ago when I redid my1970 914-6 that only needed one new cylinder and piston which left me with these 5. They have been stored in my garage ever since. Each piston and cylinder is brand new with the exception of the fact that each one has a small section of one vane broken off (one has two vanes broken). As shown in the photos they all come with wrist pins and keepers.
I am pricing these 5 units at $2,500 with shipping at $35 - $75 depending on location. I would also consider selling a single unit for $600 and shipping at cost.
Shipping cost varies by buyer location.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)