I've got a pair of 5-lug converted trailing arms for sale.
- 5-Lug hubs are 914 hubs, plated, drilled and pressed studs
- Arms were assembled with new bearings and have about 20 hrs of track time on them
- Inner flanges are standard 914
- Rebuilt calipers were fit at the time, but were raw cast finish and have surface rust now
- Rotors are vented and cross drilled - have a bit of surface rust that should clean up well - paint on them is the original from when they were purchased new
These have about 20 hours of track time on them - surface rusty calipers and rotors because I haven't been at the track in a couple years now
I noticed today that the rear arms look like they are from different years as the brake line points are in different locations - not sure if that matters
Looking for $500 + 75 to help with shipping
Thanks
Andrew M
Attached thumbnail(s)
Let me know if available I'll take them , thanks Bert
ecrobinson1726@msn.com
Hey Ben - No worries on the hijack! I used to have a 2in-2 out M&K on my track 911 when you first started doing the mufflers.
I've been out of the 911 scene for a bit - did you sell M&K?
AM
Are they M calipers on the rear? What front calipers were you using? One would need bigger front calipers to get the brake bias correct.
@http://www.914world.com/bbs2/index.php?showuser=11594
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)