Someone hacked up my fan shroud and I need the two aluminum cast halves...
Thanks!
Andrew
I'm pretty sure they were the same for all engine sizes and years.
basically yes, and there seems to be a couple different locations where the hose that goes from the shroud to the charcoal canister hook into the shroud..
Preferred shroud has a port for the charcoal canister on the driver side of the shroud....
Picture link: http://bowlsby.net/914/Classic/zTN_FI_Hose_Vac_2.0L_Late1974_A.jpg
(Thanks Jeff)
I'm 90% sure I have one, but you might wait to see if there is one locally. I can't imagine it would be cheap to ship.
True, but shipping from So. Cal to No. Cal wouldn't be too bad - better than shipping cross-country
Hey Andrew,
Let me go to my garage to see if mine has a port for a canister...
kkid
Two things: 2 "styles" - Early (sounds like what your after) & Late with the additional bosses atop to attach the smog pump.
& the Impeller housing or shroud is MAG or predominately a magnesium alloy.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)