Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ F/S Parts from a 1976 parts car.
Posted by: porscheaddic Feb 3 2019, 04:15 PM
Parting out this 1976 Porsche 914 due to rust issues on the passenger side suspension console. This is a low mileage a/s car. This is a price list of some of the parts:
Front hood very straight $250.
Door's $150.
A/c system $300.
Gauge cluster $250.
Riviera wheels $200 set of 4 no tires.
Door panels no speaker holes $80 each.
Shifter $80.
Inside shift rod $30.
Fender's front $175.
Fender's rear $150.
Ignition switch with housing $100.
Fog light switch $50.
2.0 fuel injection pm me.
Lot's more parts available, let me know what you need. Feel free to call or text me.
Thanks,
Vince 760-600-6297
Attached image(s)
Posted by: Stingbee Feb 3 2019, 05:14 PM
pm sent
Posted by: porscheaddic Feb 3 2019, 05:38 PM
pm sent
Pm replied.
Posted by: johnhora Feb 3 2019, 06:27 PM
Vince..
how much for the pass door bottom "pocket"
thanks
Posted by: porscheaddic Feb 3 2019, 07:24 PM
Vince..
how much for the pass door bottom "pocket"
thanks
It's the plastic type asking $20 plus shipping if it's clean without cracks. I'll take a closer look this Tuesday.
Posted by: johnhora Feb 3 2019, 10:00 PM
[/quote]
It's the plastic type asking $20 plus shipping if it's clean without cracks. I'll take a closer look this Tuesday.
[/quote]
OK...let me know after you hose it off and check it out 
Thanks
Posted by: davealden223 Feb 6 2019, 10:43 AM
Parting out this 1976 Porsche 914 due to rust issues on the passenger side suspension console. This is a low mileage a/s car. This is a price list of some of the parts:
Front hood very straight $250.
Door's $150.
A/c system $300.
Gauge cluster $250.
Riviera wheels $200 set of 4 no tires.
Door panels no speaker holes $80 each.
Shifter $80.
Inside shift rod $30.
Fender's front $175.
Fender's rear $150.
Ignition switch with housing $100.
Fog light switch $50.
2.0 fuel injection pm me.
Lot's more parts available, let me know what you need. Feel free to call or text me.
Thanks,
Vince 760-600-6297
In search of the passenger side lower engine cooling tin, the one that attaches below the pushrod tubes.
Posted by: buck toenges Feb 6 2019, 12:16 PM
I need the cig lighter and assembly. I also need the driver side control box please.
Buck
Posted by: Stuckon914 Feb 6 2019, 07:20 PM
Do you have the center console? Don’t need the insert that holds the gauges but don’t know if they come apart easily.
Posted by: burton73 Feb 6 2019, 08:03 PM
Is this body all rusted out or what?
Besides the dirt and major dust, it looks ok? Where are you at in CA?
Bob B
Posted by: porscheaddic Feb 6 2019, 10:24 PM
Do you have the center console? Don’t need the insert that holds the gauges but don’t know if they come apart easily.
Sorry no center console. I do have the console heater lever if you need one.
Thanks
Posted by: porscheaddic Feb 6 2019, 10:32 PM
Is this body all rusted out or what?
Besides the dirt and major dust, it looks ok? Where are you at in CA?
Bob B
Bob,
The Porsche has rusted longitudinals as well as rust in the passenger side support console. I'm in Hesperia 92345.
Thanks
Posted by: Stuckon914 Feb 7 2019, 06:22 PM
Do you have the center console? Don’t need the insert that holds the gauges but don’t know if they come apart easily.
Sorry no center console. I do have the console heater lever if you need one.
Thanks
Nope. Have that. Thanks
Posted by: gcrotvik Feb 8 2019, 08:05 AM
I need a nice drivers side door. PM sent.
Posted by: 914-300Hemi Feb 8 2019, 06:03 PM
I need a passenger door if one is still available. PM sent.
Posted by: Charles Danek Feb 8 2019, 08:59 PM
Hi! What about the fresh air box -- I am looking for one of those -- thanks in advance!
Posted by: porscheaddic Feb 9 2019, 12:10 AM
PM's answered and pics sent.
Thanks
Posted by: JOEPROPER Feb 9 2019, 09:54 AM
Looking for section of engine bay firewall where the fuel lines come thru. could you send me a picture if its good?
Posted by: Superhawk996 Feb 9 2019, 11:13 AM
Would be interested in some of the structure below the gas tank near the transition to the floorpan. especially on passenger side.
If you're willing to cut it up this far. I'll post photos of the specific areas I'm interested in.
Posted by: porscheaddic Feb 9 2019, 08:37 PM
Would be interested in some of the structure below the gas tank near the transition to the floorpan. especially on passenger side.
If you're willing to cut it up this far. I'll post photos of the specific areas I'm interested in.
Superhawk,
I sent you a pm requesting pictures.
Thanks
Posted by: craig downs Feb 10 2019, 02:19 PM
Do you have the rear trunk lid?
Posted by: porscheaddic Feb 11 2019, 11:46 AM
Do you have the rear trunk lid?
Craig,
The 1976 rear lid is gone. I have one decent rear trunk lid from a 1975 914. This lid is straight and for the most part solid. Like many of these kids it has light rust on the underside edge.
Attached image(s)
Posted by: shoguneagle Feb 15 2019, 10:52 PM
PM/Email sent.
Posted by: pvollma Apr 17 2019, 01:19 PM
Parting out this 1976 Porsche 914 due to rust issues on the passenger side suspension console. This is a low mileage a/s car. This is a price list of some of the parts:
Ignition switch with housing $100.
Thanks,
Vince 760-600-6297
I need a 1976 ignition switch. Sent PM
Posted by: drem914 Apr 17 2019, 04:12 PM
How about the door cards without speaker cut outs? is the vinyl in good shape or is it cut up or torn?
PM sent
Posted by: oldschool Apr 17 2019, 07:07 PM
what about the hell hole just below the battery tray, the inside wall?
Posted by: porscheaddic Apr 17 2019, 09:44 PM
Looking for section of engine bay firewall where the fuel lines come thru. could you send me a picture if its good?
Hi,
Sorry for the late reply. Can you send me an email address so I can send you pictures?
Thanks,
Vince
Posted by: dl5494 May 1 2019, 07:43 AM
I require the side shift rod )front and rear w/ selector ball socket for trans.) also speed drive gear and housing (have the right angle adapter already).
the release bearing guide tube, retaining bracket and bushing, release fork w/ guide piece (2) (#'s 90111608711, 90111671200, 90111674101, 90111607701 and two of 90111682511 respectively)
thank you
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)