Printable Version of Topic

Posted by: mb911 Feb 5 2019, 08:15 PM

I am about to order a bunch of 914-6 soft lines and wanted to see if anyone needed a set at a great price.

The 3 soft lines that work for a stock 914-6 $285 shipped
Same as above but all 30mm fittings for larger scavange line $300 shipped..

I believe I am cheaper then anyone on these and they are cohline brand.

Posted by: porbmw Feb 5 2019, 09:32 PM

Hi Ben
I would be in for a set!
Paul

Posted by: amfab Feb 6 2019, 11:35 PM

I am gonna have to ask for a little technical and economic advice on this one.

I don't know what I am doing oil line-wise with my 3.2 conversion. By that I mean I don't fully understand the routing and what I need to make it work. I have the motor, I have your tank, but the soft lines to which you refer— are these something I will need regardless of my cooler set up (which I have not figured out yet?).
And the economic advice: since I am at least a year out from getting the engine in—is the discount on these significant enough to warrant buying them this far in advance? Thanks as always for the help,

-Andrew

Posted by: mb911 Feb 7 2019, 11:21 AM

Guys the price is a deal for 2 reasons.. Most sell the sets for over 300 and cohline is price changing all the time. At these prices I make $20 on each set so it has always just been a service /loss leader item..

I expect prices will be going up again soon.

Andrew regardless of oil cooler setup if you stay metric you will need these lines.

Posted by: mepstein Feb 7 2019, 12:11 PM

Save me a set that fit your oil tank. And save me an oil tank

Posted by: amfab Feb 8 2019, 11:28 AM

Well, ok then I guess I am in the Group Buy.

-Andrew

Posted by: JOEPROPER Feb 8 2019, 01:10 PM

Me too... I'll be in touch as usual, if that's OK. Thanks.

Posted by: mepstein Feb 8 2019, 01:25 PM

Sometimes you just have to grab this stuff when it’s available and put it in the stash for when you need it.

Posted by: JmuRiz Feb 8 2019, 03:22 PM

Mark, you must have been in my parts loft recently, haha. Once I put my car together I'm sure I'll have tons of duplicate parts left over to sell

Ben, I guess I shouldn't have gotten my oil tank made with AN fittings huh?

Posted by: amfab Feb 8 2019, 03:58 PM

QUOTE(mepstein @ Feb 8 2019, 11:25 AM)

Posted by: mb911 Feb 8 2019, 04:19 PM

@http://www.914world.com/bbs2/index.php?showuser=19387 yes sounds good

@http://www.914world.com/bbs2/index.php?showuser=50 you can still use adapters to AN..


Guys let me know as soon as you can they are making sets now and would like to get them in one shipment if possible..

Posted by: porbmw Feb 8 2019, 06:25 PM

Would you like payment "now"..ie..this is all systems go?
Thanks
Paul

Posted by: mb911 Feb 8 2019, 09:06 PM

QUOTE(porbmw @ Feb 8 2019, 04:25 PM)

Posted by: 914forme Feb 9 2019, 07:05 AM

Ben, make sure my set has the proper fittings, your oil tank, your larger scavenger line, and 30mm off the oil cooler. So I guess I need all 30mm

Posted by: mb911 Feb 9 2019, 10:10 AM

QUOTE(914forme @ Feb 9 2019, 05:05 AM)

Ben, make sure my set has the proper fittings, your oil tank, your larger scavenger line, and 30mm off the oil cooler. So I guess I need all 30mm

Posted by: MasterCylinder Feb 10 2019, 09:12 AM

I'm in for a stock set. I have a OE tank.

James

Posted by: mb911 Feb 10 2019, 01:26 PM

Everyone I count 5 total sets so everyone that is in on this please pm details so I can order the correct sets tomorrow

Specify stock size or larger 30mm size. PayPal works but fees of 3% need to be added.

Posted by: JmuRiz Feb 11 2019, 09:32 AM

I'd love to jump in, but I'm not sure which ones to get, since I'm going to run an aux cooler in the back and have AN fittings on my mb911 tank

I'd need the bigger 30mm for sure (since I'm running a hot 2.7).

What are your thoughts?
I might be too late, but let me know...on a real computer today so I can respond ASAP

Posted by: mb911 Feb 11 2019, 08:18 PM

QUOTE(JmuRiz @ Feb 11 2019, 07:32 AM)

Posted by: Steve Feb 13 2019, 09:28 AM

How about the front? From your metal lines to a -12 oil cooler?

Posted by: mb911 Feb 13 2019, 04:55 PM

QUOTE(Steve @ Feb 13 2019, 07:28 AM)

Posted by: Steve Feb 14 2019, 10:06 AM

Thanks Ben!! @http://www.914world.com/bbs2/index.php?showuser=9892 What adapters would I need? 30mm male to -12 female to my front cooler?
I would be interested in the front lines.
Thanks again for the help.

Posted by: mb911 Feb 14 2019, 11:20 AM

Steve I think Pegasus racing sells the adapters.

Posted by: mb911 Feb 21 2019, 04:17 PM

All paid sets are shipped.. Still waiting on a check or 2

Posted by: mb911 Feb 26 2019, 06:19 PM

Have 1 set of standard and 1 set of large capacity 30mm left.

@http://www.914world.com/bbs2/index.php?showuser=19387 I still have a set of you are still interested.

Posted by: JOEPROPER Feb 27 2019, 07:45 AM

Check's in the mail. Thank You!