The GA engine is a long block and doesn't turn. $400. plus ship SOLD
The other engine is a 1.8 numbered block with 2.0 heads that was built for a track car. Includes distributor and alternator clutch and flywheel. I removed it in running condition but the compression was low. Includes sheet metal. $650. plus ship Pair of 1.8 big valve heads with double valve springs, the heads have been bored to 112mm for an oversize piston/cylinder. I measured the valves 39 and 47mm but they are probably 38 and 48. The seats almost touch and there is a open spot in the aluminum between them. I don't know if this is normal? $110. for the pair plus ship.
Brad Mayeur
Heads SOLD
Attached thumbnail(s)
Attached image(s)
Hi Brad, I'll take the heads...
Additional head pictures. There is an 8mm Helicoil in one exhaust stud hole. Brad
Attached image(s)
Hello Brad I’m interested in the 2.0 long block motor . What would shipping be to 93706
Or Fresno ca.
Engines still available
Bump
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)