Printable Version of Topic

Posted by: drem914 Mar 20 2019, 09:38 PM

Looking for some replacement door cards for a late model 75 or 76 late style brick weave in black.
Also looking for the metal angle that hold the protective rubber bumper to the engine lid. if you have more that one I'll even take a couple.
TIA

Posted by: 914Sixer Mar 21 2019, 06:30 AM

Check 914Rubber for door panels.

Posted by: drem914 Mar 21 2019, 09:10 AM

I did and the panels they sent out don't fit (too thick with all the material build up wrapped around the plastic backing panels.) Can't close the door. Am looking to get them returned at this time. My originals popped right in no problem, which is why I am looking for an old stock set instead. the original panels have a relief at the panel edge and te material is not nearly as thick when bent around the panel. In fat my only problem with my current panels is that the PO cut speaker holes in them. Other that that they are perfectly fine.

Posted by: 914Sixer Mar 21 2019, 03:29 PM

I have a set that are new but made in fiberglass. Not sure where I got them.

Posted by: drem914 Mar 21 2019, 04:28 PM

Do you know if the black vinyl is late or early basket weave?

Posted by: 914Sixer Mar 21 2019, 07:33 PM

Late, they are still wrapped and in the box. I am not selling them, they are for my 75.

Posted by: cgnj Mar 21 2019, 08:11 PM

I have a set from a my 76. Make an offer. Shipping from 08055.





Attached thumbnail(s)

Posted by: drem914 Mar 21 2019, 10:16 PM

I'll pm you to discuss.