Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ 2056 engine for sale Sold for 1800

Posted by: colingreene Apr 11 2019, 11:48 AM

I am selling this for someone else, Its a 2056 engine with
Motor has stock crank rods and oil pump
has 96mm kb pistons and the cyls are from European Moto rworks in Hawthorne
only other modification it has is a NOrris cams 272x cam
It was being run with a single carb however I strongly recommend a set of duals, we are selling it without induction, i just left it on to keep the dirt out of it.
I did pull one runner set and the passenger side tin because i dropped a crows foot into the tin trying to remove the oil pressure sensor line.
Its not spotless under the tin but its certainly not a mess.

motor has around 8000 miles on it.
comes complete with tin and fan shroud however no alternator.

Ran well when pulled, reason its being sold is its a spare and not needed now.
we built another identical engine on a run stand and put fuel injection on that so rather than move it over to this motor im going to install that motor directly into the car.

asking 2k can be seen in Costa Mesa ca.

https://imgur.com/gallery/xS9bZVc?fbclid=IwAR1hUlmabFIPlVWqYsWhWNgPBHgPdNu6cZLuDLJjRKkdmKnIAADXDxYwmcM

Posted by: Tdskip Apr 11 2019, 11:50 AM

PM sent

Posted by: RFoulds Apr 11 2019, 04:51 PM

PM sent.

Posted by: Tdskip Apr 12 2019, 06:41 AM

Good communication from the seller and cooperative but I'm going to rebuild one of mine, so I'm out on this one.

I did not actually see the engine - nothing bad to say, just going in different direction.

Posted by: colingreene Apr 12 2019, 10:01 AM

Thanks for letting me know Tdskip.

Posted by: colingreene Apr 18 2019, 12:25 AM

This is sold, Just need to get it to its new owner.

Posted by: colingreene Apr 24 2019, 05:27 PM

Sold.