Need the small SPRING that goes inside the door lock actuator lever. NEED 2. Everything else in the locks look fine except missing the springs. PO must've have been in there. Any help?
Sent PM.
Strange item to be missing. So the pin was removed and the replaced without the spring?
It is difficult to get the spring back on the pin but be very careful. I've done this a few dozen times and if you don't think you can get it let me know and I'll do it for you.
Just to clarify - I need the spring that sits in this part.
Paul
OK I was thinking it was the other spring that returns the flapper piece.
Never mind.
Anyone??
PM sent. Thanks much.
Paul
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)