Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB: Triad Exhaust
Posted by: rbzymek May 1 2019, 08:45 AM
Looking for a Traid exhaust to replace my Bursch system. I have factory heat exchangers on the car. Thanks in advance.
Ray
Posted by: Mikey914 May 1 2019, 09:28 AM
If I recall correctly you have the 1.7 / 2.0 heat exchanger flanges. The 1.8 are more triangle shaped.
Posted by: euro911 May 1 2019, 03:57 PM
Early 1.7L & 1.8L are pretty much identical ... 2.0L is different, mainly the up-sweep near the muffler flanges ...
...bit there's also a difference of the distance between the flanges ...
Posted by: rbzymek May 1 2019, 05:10 PM
QUOTE(euro911 @ May 1 2019, 03:57 PM) 
Early 1.7L & 1.8L are pretty much identical ... 2.0L is different, mainly the up-sweep near the muffler flanges ...
...bit there's also a difference of the distance between the flanges ...
The pictures are helpful. I think I have a 1.8 system. I have contacted Dave so a new Triad may be the way to go. Yes the trans needs a rebuild as well. I also have most of the parts to switch back to L-Jet so it goes on the jack stands soon.
Ray
Posted by: ndfrigi May 1 2019, 05:26 PM
QUOTE(rbzymek @ May 1 2019, 04:10 PM)
QUOTE(euro911 @ May 1 2019, 03:57 PM)
Early 1.7L & 1.8L are pretty much identical ... 2.0L is different, mainly the up-sweep near the muffler flanges ...
...bit there's also a difference of the distance between the flanges ...
The pictures are helpful. I think I have a 1.8 system. I have contacted Dave so a new Triad may be the way to go. Yes the trans needs a rebuild as well. I also have most of the parts to switch back to L-Jet so it goes on the jack stands soon.
Ray
you have a 2.0 HE
Posted by: rbzymek May 29 2019, 11:36 AM
QUOTE(ndfrigi @ May 1 2019, 05:26 PM)
QUOTE(rbzymek @ May 1 2019, 04:10 PM)
QUOTE(euro911 @ May 1 2019, 03:57 PM)
Early 1.7L & 1.8L are pretty much identical ... 2.0L is different, mainly the up-sweep near the muffler flanges ...
...bit there's also a difference of the distance between the flanges ...
The pictures are helpful. I think I have a 1.8 system. I have contacted Dave so a new Triad may be the way to go. Yes the trans needs a rebuild as well. I also have most of the parts to switch back to L-Jet so it goes on the jack stands soon.
Ray
you have a 2.0 HE
Cancel request. I purchased a new exhaust from Dave.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)