Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ **SOLD**Original working 914-6 fuel pump

Posted by: tailwind22 May 30 2019, 07:43 AM

Original fuel pump from a 70 914-6. Tested with fuel on a bench and it pumps strong and very quiet, functioning perfect. $300 plus shipping. PP users please add 3% or use no fee option.


Attached thumbnail(s)
Attached Image Attached Image Attached Image Attached Image

Posted by: daytona May 31 2019, 05:18 AM

Hi,
Just for my education; what is the difference between a 4 and a 6 fuel pump.
Thanks,
Bill.

Posted by: bdstone914 May 31 2019, 05:56 AM

@http://www.914world.com/bbs2/index.php?showuser=17249
Hi,
Just for my education; what is the difference between a 4 and a 6 fuel pump.
Thanks,
Bill.
[/quote]

Low pressure pump for carbs.
Bruce

Posted by: tailwind22 May 31 2019, 11:49 PM

Weekend bump for a quiet running and strong pumping original 6 pump

Posted by: tailwind22 Jun 5 2019, 12:01 PM

Reduced price from $500 to $400 to get this moving.

Posted by: tailwind22 Jun 12 2019, 07:33 AM

Mid-week bump

Posted by: tailwind22 Jun 18 2019, 07:32 AM

ttt

Posted by: johnhora Jun 18 2019, 09:20 AM

tailwind22

You may also want to place this over on the pelican site as it's the same pump that was used on the 911T with carbs...
Also looks like it has been opened up before by the marks on the screw heads.
Possibly to replace the O ring gaskets
GLWTS

Posted by: tailwind22 Jun 19 2019, 07:56 AM

QUOTE(johnhora @ Jun 18 2019, 08:20 AM) *

tailwind22

You may also want to place this over on the pelican site as it's the same pump that was used on the 911T with carbs...
Also looks like it has been opened up before by the marks on the screw heads.
Possibly to replace the O ring gaskets
GLWTS


Thanks, good idea. I have opened up the pump to check the o rings. They were nice and pliable and gave them some fresh lube.

Posted by: tailwind22 Jun 29 2019, 08:18 AM

bump

Posted by: tailwind22 Jul 9 2019, 10:34 AM

Bump

Posted by: Ohtsquared Jul 10 2019, 09:47 AM

Hello, what are the numbers stamped on the bottom? Thanks

Posted by: tailwind22 Jul 10 2019, 10:30 AM

Here is a picture of the stampings on the end of the pump.




Attached thumbnail(s)
Attached Image

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)