Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ FS: 914-6 engine tin

Posted by: zephyrblau Jun 5 2019, 11:07 AM

*** please see the detail pix of the front piece below and help if you can ***

the original post was getting a little messy. these are what's currently available.
add shipping.
long front tin $80 SOLD
side pieces $35 ea. 2 SOLD
see detail pix.
Attached Image

Posted by: zephyrblau Jun 6 2019, 11:02 AM

I have an interested party inquiring if this piece has been modified. comments please.

detail pix of the front piece.
Attached Image [attachmentid=700392]

Posted by: Luke M Jun 6 2019, 11:48 AM

Yes, the tins have been modified.
The front for the oil fed tensioners, and sides maybe for dual plug?

Posted by: Retroracer Jun 7 2019, 08:02 PM

Oil fed Tensioners on the front pieces, and cuts in the side pieces possibly for twin plug spark plug wire routing; or possibly to clear the suspension bolts on engine insertion / removal (though this is not usually necessary)

- Tony

Posted by: skier2.0 Jun 21 2019, 06:59 PM

The side pieces cut to clear the trailing arm bolt.

Posted by: rgalla9146 Jun 21 2019, 07:29 PM

The front piece and two of the three side pieces are aftermarket copies.
Carrera tensioner mods are not an issue. Even on an original part.
The side pieces ? installing a 6 engine is always a juggling act.
I would never cut originals. I install them after the engine is mounted but I have
stupid patience and tenacity.
Cut fakes ? who cares ?
I'd fab a filler piece to attach after engine install.