Blackhawk frame bench with 3 cross beams and 4 fabricated cross beams. Includes four Blackhawk frame stands, and five custom fixtures for a 914 chassis.
This bench has the same bolt spacing as the Cellette benches of the same vintage and I have been told the old style 914 fixtures will work on it, but I have not had any here to confirm that
$2200
Attached thumbnail(s)
Wonder what shipping would cost ??
I have a double axle 16' flat bed trailer that I pull with my F150. It was about 700 miles each way for me to go get it. I'd consider selling the trailer with the frame bench, it's got a new deck and electric brakes. You can put a 914 on it, but it's got side rails and it could be tricky getting in and out of a car on for a heftier guy than me.
A couple guys have asked for the dimensions. It's 13'7" long and 4' 2" at the ends. I got it loaded with two floor jacks, and it didn't roll so good. I've since rebuilt the casters and it rolls great.
Hi Perry,
How does it attach at the front end?
Any pics of that?
luke, may not have got that done,
http://www.914world.com/bbs2/index.php?showtopic=297615&hl=blackhawk&st=0
Attached image(s)
Thanks Jeff
Sale pending
Is this bench still available?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)