Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ New 914 Fuel Injectors From Germany
Posted by: Steve H Aug 29 2019, 01:48 PM
I just got this ad from Mittelmotor in Germany regarding a new source of FI for the 914. Since Bosch hasn't made any new FI's since 2007, I know there is interest in this product. I obviously have nothing to do with the seller but thought I would send it along to the 914 World.com
https://www.mittelmotor.de/cms/de/component/acymailing/mailid-138?key=5CHQqgcl&subid=12837-1es9qTie8D8qtF&tmpl=component
Posted by: euro911 Aug 29 2019, 04:09 PM
Question - for @http://www.914world.com/bbs2/index.php?showuser=104
We're rebuilding the old 1.7L motor for my '71 as a 1.9L and planning to install the factory 1.7L D-jet injection system.
Will I need to change the injector connectors on a 1.7L harness to use 2.0L injectors? (I don't have my harness or any injectors handy to check).
Posted by: JeffBowlsby Aug 29 2019, 06:54 PM
the 1.7L and 2.0L D-Jet connectors are all the same.
Posted by: euro911 Aug 29 2019, 09:28 PM
Thanks, Jeff 
Posted by: bdstone914 Aug 31 2019, 07:00 AM
I just got this ad from Mittelmotor in Germany regarding a new source of FI for the 914. Since Bosch hasn't made any new FI's since 2007, I know there is interest in this product. I obviously have nothing to do with the seller but thought I would send it along to the 914 World.com
https://www.mittelmotor.de/cms/de/component/acymailing/mailid-138?key=5CHQqgcl&subid=12837-1es9qTie8D8qtF&tmpl=component
Thise are American made by Standard Motor Products and sell for about $80 each in the U.D.
Part number is FJ67.
Heard one report that the original harness connector does not fit well. Terminals are reported to be wider.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)