Printable Version of Topic

Posted by: theer Sep 17 2019, 05:05 PM

I need a few small parts to keep going on the final assembly process for Grey Matter:

- Late glove box mounting strap
- (2) rear sail panel trim bottom mounting clips/brackets (need both sides)
- sun visor mountings & pins: driver side & center
- (2) late window winder handles
- (2) heat/fresh air diffusers and mounting hardware- these are the plastic pieces up under the dash that split the "heat" from the mixer valves to the left & right. #11 in the diagram below:



Let me know what you've got (ship to 02030)

Thanks,
Tom

Posted by: 914Sixer Sep 17 2019, 05:53 PM

New pair Hella window handles on Ebay for $20

Posted by: carl k Sep 17 2019, 08:16 PM

I have one handle (Genuine) and the targa trim brackets.

-Carl

Posted by: theer Sep 25 2019, 12:58 PM

Update: found everything except the sun visor mounts & pins.. anyone?

Posted by: 914_7T3 Sep 25 2019, 01:01 PM

QUOTE(theer @ Sep 25 2019, 11:58 AM)

Posted by: 914Sixer Sep 26 2019, 06:05 AM

I have some used ones, just have to dig them out.

Posted by: Mikey914 Sep 26 2019, 11:14 PM

Thanks for the props. We are the only ones who use stainless pins as you will see on used the visors scratch the chrome and they start to rust. They are also textured correctly too.

https://shop.914rubber.com/914-Visor-clip-set-left-right-and-center-914VCS.htm?categoryId=-1

I'll do a GB if I can get 5 takers at $75 a set of all 3.

Just let me know if there is interest