Printable Version of Topic

Posted by: 914_7T3 Sep 23 2019, 05:20 PM

Looking for the 2 spacers that seat on the inside of the curved sail panel trim.

These guide the 19mm screws that secure the top of the trim as referenced in the below photo.






Thanks for looking

Posted by: 914Sixer Sep 24 2019, 05:47 AM

Might have some.

Posted by: 914_7T3 Sep 24 2019, 03:21 PM

@http://www.914world.com/bbs2/index.php?showuser=3457 saves the day!

Look at those beauties!




Thanks Mark

Posted by: mepstein Sep 24 2019, 04:35 PM

Jeffrey - I need some of those but they don’t have to be original. Do you mind taking some measurements for me?

@http://www.914world.com/bbs2/index.php?showuser=20991

Posted by: 914_7T3 Sep 24 2019, 05:07 PM

@http://www.914world.com/bbs2/index.php?showuser=10825 I don't mind at all. You can also check with @http://www.914world.com/bbs2/index.php?showuser=3457 as maybe he has got more.

Posted by: theer Sep 25 2019, 12:53 PM

Aw man, I didn't know it until now, but I need a set, too.

Posted by: mepstein Sep 25 2019, 01:15 PM

I don’t need original, just looking for the size to make something work. Thanks.

Posted by: 914_7T3 Sep 25 2019, 10:40 PM

@http://www.914world.com/bbs2/index.php?showuser=10825 I'll update you the dims after I receive them.

Posted by: mepstein Sep 26 2019, 05:09 AM

914Sixer found me a set. Thanks

Posted by: porbmw Sep 26 2019, 10:02 AM

Is this something that 914rubber might consider making
I need a set and I bet there are "many of me"....
Paul

Posted by: Mikey914 Sep 26 2019, 11:20 PM

Actually already making just not listed. I'll post up a GB in the garage with reg mail postage. We also have the screws in stainless. Will be quite inexpensive, just need to see how many sets I have done up.

These are critical to keep from crushing the metal down and holding the screw in place to mount.