Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ WTB:, a drivers door arm rest

Posted by: Bibble Oct 4 2019, 07:48 AM

Hello all, looking to buy a drivers side door arm rest in good order, If anyone has one? Lots of passenger side ones around it seems but not many drivers side. unsure.gif

Please let me know if you have one and are prepared to ship to the U.K.

Many thanks

Jonathan

Posted by: euro911 Oct 4 2019, 07:40 PM

i believe I have a spare one. I'll locate it and post some pix this w/e.

Posted by: Bibble Oct 4 2019, 11:31 PM

QUOTE(euro911 @ Oct 4 2019, 07:40 PM) *

i believe I have a spare one. I'll locate it and post some pix this w/e.


Hello Mark, thank you very much - look forward to the pictures
Best wishes - Jonathan

Posted by: euro911 Oct 7 2019, 02:28 PM

It's NOT in concours condition, but it's not bad for being +/- 50 years old.

There are a few scuffs on it, but they're on the bottom so won't normally be seen.

Attached Image

Attached Image

Attached Image



The bottom three holes, where it screws to the door panel, look a little funky on the inside, but once installed also aren't seen.

Attached Image

Attached Image

Attached Image

Attached Image


I don't have the mounting hardware (bolts & screws), and I didn't find the spring mechanism for it, but I'll keep looking.

Posted by: Bibble Oct 8 2019, 12:45 PM

QUOTE(euro911 @ Oct 7 2019, 02:28 PM) *

It's NOT in concours condition, but it's not bad for being +/- 50 years old.

There are a few scuffs on it, but they're on the bottom so won't normally be seen.

Attached Image

Attached Image

Attached Image



The bottom three holes, where it screws to the door panel, look a little funky on the inside, but once installed also aren't seen.

Attached Image

Attached Image

Attached Image

Attached Image


I don't have the mounting hardware (bolts & screws), and I didn't find the spring mechanism for it, but I'll keep looking.


Thank you Mark, looks fine, be good if you have the spring as well. How would you to proceed ? Send me a PM ?

Best wishes

Jonathan

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)