Posted by: 914werke Oct 20 2019, 05:36 PM
VERY Nice pre-owned Triad for /6 or 911. Ceramic coated & bung installed
$450 + ship
* SOLD *
Attached image(s)
Posted by: 914werke Nov 6 2019, 11:20 AM
Original Bursch 2.0L Exhaust. Surface rust.
$250 +ship
Attached thumbnail(s)
Posted by: DMAYHALL Nov 6 2019, 02:51 PM
Late collectors still available ?
Posted by: 914werke Nov 6 2019, 03:40 PM
Late (75-76 MY) exhaust collectors (head pipes)
$100 +ship
Attached image(s)
Posted by: Jett Nov 16 2019, 02:21 PM
QUOTE(914werke @ Oct 20 2019, 03:34 PM)
Gotta make room in the shop ...
Late (Ansa?) 4 tip $125
[attachmentid=716303]
[attachmentid=716304]
Early (Ansa?) 4 tip $125
Late Bursch
SOLD[attachmentid=716307]
[attachmentid=716308]
+ ship
The muffler looks great, thanks!
Posted by: 914werke Jan 21 2022, 07:30 PM
Damn I found another one. 2.0L Ansa quad tip
Lets off these, price updated.
Posted by: markhoward Jan 22 2022, 10:47 AM
QUOTE(914werke @ Oct 20 2019, 03:36 PM)
NOS never mounted early Monza (quad tip) 1.7/1.8L $275 $225
(some shelf wear)
[attachmentid=823430]
[attachmentid=823431]
[attachmentid=823432]
+ ship
Is this system too small for a 2056 with SSI’s? Not sure if ‘early.. 1.7/1.8L’ has to do with describing the tube diameter of the system or the 4 hole inlets.
Posted by: 914werke Jan 22 2022, 11:56 AM
QUOTE(markhoward @ Jan 22 2022, 08:47 AM)
Is this system too small for a 2056 with SSI’s? Not sure if ‘early.. 1.7/1.8L’ describes the tube diameter of the system or the 4 hole inlets.
Any SSI HE's set whether 1.7-1.8 or 2.0 should have the same tube diam.
To my knowledge SSI (or now Dansk) never made a late (single outlet) system.
[edit: George now sells a system like this ]
On the early systems the differentiation is the configuration of the HE's.
On the 1.7-1.8L HE's, the tubes swept up where they met the muffler where the 2.0L's didnt.
This necessitated a different hanger and a different muffler.
The quad tips was just a different design some people like.
Bottom line a 2056 isn't so significantly bigger that you will notice any gain or loss.
SO ...yes it would be fine for that setup
Posted by: rhodyguy Jul 24 2022, 12:39 PM
The flange holes and gasket holes are sized differently 1.7 vs 2.0 as well
Posted by: JHarden Aug 4 2022, 12:41 PM
QUOTE(markhoward @ Jan 22 2022, 11:47 AM)
QUOTE(914werke @ Oct 20 2019, 03:36 PM)
NOS never mounted early Monza (quad tip) 1.7/1.8L $275 $225
(some shelf wear)
[attachmentid=823430]
[attachmentid=823431]
[attachmentid=823432]
+ ship
Is this system too small for a 2056 with SSI’s? Not sure if ‘early.. 1.7/1.8L’ has to do with describing the tube diameter of the system or the 4 hole inlets.
Would it fit a 1974 1.8?
Posted by: 914werke Aug 4 2022, 01:14 PM
QUOTE(JHarden @ Aug 4 2022, 11:41 AM)
Would it fit a 1974 1.8?
@http://www.914world.com/bbs2/index.php?showuser=25147 That NOS one did sell. sorry
Posted by: mate914 Mar 6 2023, 07:51 PM
QUOTE(914werke @ Oct 24 2019, 05:58 PM)
Bischoff 911 Duel in, single out 911.025.01/873 (stainless) muffler, from the 2.7L Carrera ? Kinda beat up, but intact.
$225 +ship
Hi, Did this sell? Can I have a shipping quote to 17758 PA?
Thanks,
Matt
Posted by: 914werke Mar 6 2023, 08:16 PM
QUOTE(mate914 @ Mar 6 2023, 05:51 PM)
QUOTE(914werke @ Oct 24 2019, 05:58 PM)
Bischoff 911 Duel in, single out 911.025.01/873 (stainless) muffler, from the 2.7L Carrera ? Kinda beat up, but intact.
$225 +ship
Hi, Did this sell? Can I have a shipping quote to 17758 PA?
Thanks,
Matt
Nope I have it. Ill check on ship.
Posted by: Oldironpuller Mar 11 2023, 06:09 AM
QUOTE(914werke @ Oct 20 2019, 06:36 PM)
VERY Nice pre-owned Triad for /6 or 911. Ceramic coated & bung installed
$450 + ship
I’ll take the triad. PM sent last night.
Posted by: 914werke Mar 13 2023, 10:36 AM
QUOTE(Oldironpuller @ Mar 11 2023, 05:09 AM)
QUOTE(914werke @ Oct 20 2019, 06:36 PM)
VERY Nice pre-owned Triad for /6 or 911. Ceramic coated & bung installed
$450 + ship
I’ll take the triad. PM sent
On its way!