Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ WTT: 911 Front Hub

Posted by: bigkensteele Dec 3 2019, 08:12 PM

I have a pair of non-matching front hubs, and I need a matching set. The left is an early and the right is late. I would prefer to trade the early for a late, but I will take what I can get. Anybody have any spares laying around?

Thanks,
Ken
Attached Image

Posted by: mepstein Dec 3 2019, 09:15 PM

Ken - I'm pretty sure I have a mismatched set. I don't think I will be home until friday so I'll check then.

Posted by: bigkensteele Dec 3 2019, 09:19 PM

QUOTE(mepstein @ Dec 3 2019, 07:15 PM) *

Ken - I'm pretty sure I have a mismatched set. I don't think I will be home until friday so I'll check then.

I like how this is shaping up! No hurry.

Posted by: P_G Dec 5 2019, 11:28 AM

Hello
I have a pair of early Hubs in excellent condition.
Thank you
Paul

Posted by: mepstein Dec 7 2019, 08:30 AM

@http://www.914world.com/bbs2/index.php?showuser=2660

Ken - here’s the two hubs. Early hub is in great condition. Later hub must have gotten dropped on the edge. Will need the bumps filed so the rotor sits flat on the face of the hub. 5 minutes with a flat file should do it. No studs on either hub. Let me know which one you want and we’ll do the trade. Thanks, mark


Attached thumbnail(s)
Attached Image Attached Image Attached Image

Posted by: bigkensteele Dec 7 2019, 10:37 AM

@http://www.914world.com/bbs2/index.php?showuser=10825 Hi Mark, if you feel the later one can be easily fixed, I will go with that one. My early is not as clean as yours but it is in excellent shape. If you don't mind, I will press out my studs.

I will respond to your PM with my address and #.

Thanks!
Ken

Posted by: mepstein Dec 7 2019, 11:00 AM

QUOTE(bigkensteele @ Dec 7 2019, 11:37 AM) *

@http://www.914world.com/bbs2/index.php?showuser=10825 Hi Mark, if you feel the later one can be easily fixed, I will go with that one. My early is not as clean as yours but it is in excellent shape. If you don't mind, I will press out my studs.

I will respond to your PM with my address and #.

Thanks!
Ken

All sounds good and yes, I’m sure it will clean up fine with a few strokes of a file but if for any reason you are not satisfied we will work something out so that you are.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)