Here is a replacement of the leak prone OE stamped steel sender assembly or an option for those cars without one, on your 914!
One piece, made of thick billet aluminum ...very nice!
Available https://914werke.com/shop/ols/products/billet-oil-temp-assembly/v/OIL-TMP-SND-SSM & in the http://www.914world.com/bbs2/index.php?s=&showtopic=342242&view=findpost&p=2769869section
Is this available?
The web sight says backordered?
How long until more come in?
matt
Jumped the gun. correcting right now
Bought one!
Does the sender work with the aftermarket VDO temperature gauge?
Depending on the model (temp range) Yes.
Sender assemblies are in stock Sumps are taking a bit more time
Like a lot of folks, Getting materials & components is taking WAY longer nowadays.
Ordered one!
Here's mine, I just installed it yesterday and it fit great. Thanks again!
UPDATE:
I realize I've never advised that both the Assembly now come with a boot to enclose the sender cavity to ensure stable temperature of the sender & keep it unaffected by any air movement.
Back home shipping orders.
Get um now before winter shipping rates take effect !!
According to your website, it shows these as back ordered. I am interesting in purchasing the billet plate, along with OE (preferred) temp sender, the boot, associated gaskets and hardware.
Actually the only item(s) unavailable right now are the bare senders.
I do have assemblies & plates available.
If ever you have question give me a call
@http://www.914world.com/bbs2/index.php?showuser=18667 It'll go out today! (BTW Ill credit you the shipping!)
When ordering the aftermarket billet assembly section on your website, what does it entail? Plate, hardware, gasket(s) and sender? Going to place an order most likely tomorrow. @http://www.914world.com/bbs2/index.php?showuser=453
PM sent
Got mine this week. Looks like good quality, Rich. Hope to install soon.
Is it just me or the link “Here” in your first post not working?
Wasnt you. Link got broke somehow.
Fixed
Thanks for bringing to my attn
@http://www.914world.com/bbs2/index.php?showuser=453 Just got my parts today. Everything looks amazing. I will have to open a hole large enough for the oil temp sender wire to go through that I got from Jeff Bowlsby. On the downside I just changed my oil a few weeks ago haha. Free bump for an amazing looking product.
-David
[quote name='914werke' date='May 17 2025, 07:04 PM' post='3206050']
[quote name='mitchg27' post='3206048' date='May 17 2025, 06:44 PM'] Rich When will taco plate assy with boot and sensor be back in stock?[/quote] Plenty available, been behind on updating the store. Thanks for the
Evan have new items Ive got to list.
Great!
Thanks for updating site. Ordering now.
Everyone Taco's !
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)