Printable Version of Topic

Posted by: Jett Dec 22 2019, 08:48 AM

Hello we are looking for the large plastic plugs for our lower dash pad and driver’s side door compartment.

We need two sets of each for our restored 73 and 75.

I saw a picture of the allusive plugs... but cannot find them on 914Rubber


Attached image(s)

Posted by: mepstein Dec 22 2019, 08:55 AM

Are they the same size as the ones on the side of the lower dash pad?

ITEM # OEM91455223310
8 mm Interior Screw Cover

https://900designs-container.zoeysite.com/8-mm-interior-screw-cover

@http://www.914world.com/bbs2/index.php?showuser=17686

Posted by: Jett Dec 22 2019, 09:03 AM

I think they are the same size, but I was confused by the default item count of 26, so I assumed these are the smaller plugs that go in the various interior pieces.

@http://www.914world.com/bbs2/index.php?showuser=3348 any idea?

Posted by: Mikey914 Dec 22 2019, 09:59 AM

Those are actually larger than the regular screw covers. Sorry I have not made them yet. But I can if they are not available. I think the dealer may have these. They are just $5 a pop

mark

Posted by: Jett Dec 22 2019, 10:08 AM

What size are they? 20mm?

@http://www.914world.com/bbs2/index.php?showuser=3348 . we like to buy our parts from you

Posted by: Mikey914 Dec 22 2019, 10:10 AM

If I recall correctly ours is 8mm and it's like 10mm (hole size). Close enough it's looks good until you try to fit it and it's just a little too small.

Posted by: 76-914 Dec 22 2019, 10:20 AM

Or you can place a 1/2" long slender thread of Butyl tape (left over from a windshield install) around the flange of the plug and it will stay in place, no matter how deformed. The plug is easily removable in the future and doesn't show as the Butyl is black.

Posted by: Jett Dec 22 2019, 10:31 AM

Great idea, but I would love the correct plugs.

@http://www.914world.com/bbs2/index.php?showuser=3348 .. can you manufacture some? I suspect a few of us are missing these

Posted by: Mikey914 Dec 22 2019, 11:39 AM

We have the butyl. SO I'll check to see how well this works,
but Yes I can make these let me find a sample of one in one of my cars. Makes sense since we make the door panels, door panel clips, the plastic surrounds for the handles, and sell the vinyl kits, might as well have these too.
Mark

Posted by: FlacaProductions Dec 22 2019, 11:44 AM

I'm in.

Posted by: 914LIVE Dec 22 2019, 03:06 PM

=================================

Merry Christmas.

Santa to the rescue !!!

If Santa finds any, Santa will
drop them down your chimney.

Thank you, Santa.

=================================

Posted by: Jett Dec 22 2019, 05:04 PM

Great form!

Posted by: PCH Dec 23 2019, 02:13 PM

I got my plugs from the local ACE hardware store.

Posted by: 914LIVE Dec 23 2019, 05:47 PM

========================

Santa has found TWO so far.

Santa keeps on looking.

========================

Posted by: 76-914 Dec 24 2019, 06:59 PM

@http://www.914world.com/bbs2/index.php?showuser=3348 Mark a pic is worth a 1000 words and yes it works.