Printable Version of Topic

Posted by: kwyjibo Dec 26 2019, 11:24 AM

Free!!! just a couple conditions...
1. Free to someone who needs it. Please reply with a photo of your broken/cracked hub to show that you need a replacement and its yours.
2. You pay shipping.
That's it. Just the plastic hub cover and cancel ring - horn pin not included.

Posted by: gereed75 Dec 26 2019, 05:08 PM

Oh man, need both of these. No photo of old parts, but just built this wheel

http://www.914world.com/bbs2/index.php?showtopic=342149&hl=Latest+project

Old wheel was missing the cancel ring and the horn button.

Posted by: kwyjibo Dec 26 2019, 06:10 PM

If you need both, they're yours. If you need just the cancel ring, I can separate it from the plastic cover - If someone needs the cover to replace a cracked one, they probably have have the ring already.
send me a pm.

Posted by: gereed75 Dec 26 2019, 10:58 PM

Thanks for generous offer. Had another member step up with a cancel ring and contact pin. Hope you can help another member in need.

Posted by: 1970-1914 Dec 26 2019, 11:14 PM

I could definitely use the cancel ring if it is the same for a 1970 car. I sold my stock wheel with it attached not realizing my aftermarket wheel hub did not come with that provision.

Pierre

Posted by: kwyjibo Dec 27 2019, 01:38 PM

Hello Pierre,
Send me your zip code and I'll get a shipping estimate.

Posted by: kwyjibo Dec 30 2019, 05:26 PM

The turn signal cancel ring is now gone.
The plastic cover is still available.

Posted by: Teryn It Up Jul 11 2020, 11:27 PM

do you still have the plastic cover?

Posted by: kwyjibo Jul 12 2020, 09:03 PM

Yes, I should still have it. Let me see if I can find it! PM your address and I'll look into shipping

Posted by: Teryn It Up Jul 12 2020, 10:01 PM

Pm sent

Posted by: 7T914-6 Jul 13 2020, 07:47 AM

Can any one tell me how this plastic cover can be attached to an aftermarket steering wheel hub. I have a 1970 and can’t figure out how to close the gap between the hub and steering column.

Posted by: kwyjibo Jul 13 2020, 08:43 AM

Short answer: it can't. This cover acts as a spacer/cover for the stock steering wheel. If you're using a MOMO or Nardi hub and you see a gap at the back of the hub, you're probably using the wrong hub. From your user name, it looks like you have a 914-6, which uses the pre-'74 hub for 356, 911 and 914-6. These are hard to find and when you do, they're expensive.

Posted by: kwyjibo Jul 25 2020, 07:43 PM

These parts are now all gone.