Working from oldest to newest:
First up Dino Steering Wheel - I got this off a 914-4 PCA stock race car back in the early 90s. Could never get the racers tape off from wear a stop watch was mounted. This was before lap timers where affordable for the CSOB.
I used it for years in my 1974 914-4 Auto-X car, smaller than stock wheel.
Dino, hub adapter, horn button, cancelling ring, and some where I have the bag of Allen screws to mount it to the hub. $75 shipped - Sale Pending
Sold items removed, prices reduced.
914-4 steering column late $80 shipped, will be disassembled for shipping to keep the switches in working order.
911 column shell early unit not sure of years $40. I know it does not fit the latter column and switch gear.
Removed items that have sold Reduced prices
I'll take the vitaloni mirrors.
I’ll take the quick release
Hi
I will take the stereo
thanks Bob
I would like the heater block off plates please.
Keep kicking myself for not getting it sooner but I'll take seconds on quick release and lock set. thanks
PMs all sent
What’s the diameter of the new Momo? Thanks
PayPal sent .
@http://www.914world.com/bbs2/index.php?showuser=16470
Mod. 07
Diameter 350mm 13.77"
Dish 72mm 2.834"
Grip Section 29mm x 30mm 1.14 " x 1.18"
Black Leather
Hope that helps
https://momo.com/en-us/product/track-us/steering-wheels-track-us/mod-07/
PM sent on Momo Mod 07 wheel if Blue6 does not take it
PM sent on steering column
PM responded too
Stephen, thanks for the info. I’m going to pass as I’m looking for a larger dia. Aggie zig, your up on this sweet deal...
Boss/guru says I should just get a switch, so I'll pass on the steering column to whomever is next in line.
Good luck to all
First round shipped out
Bump these three items still available, prices reduced.
2nd on the Dino in case the sale falls through
Question raised about dish of the Dino. Pictures taken and roll of 3 inch packing tape shown for perspective.
Shot from edge of bench top, that would top gives no clear edge
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)