Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ FS: Pair 16x8 Original Fuchs 951 #- $1200
Posted by: JRust Jan 30 2020, 06:46 PM
Pair of 16x8 Original Fuchs. Offset perfect for 914's. These have the 951 part #. Need refinished but solid wheels. Looks like the lips were being prepped to polish. Anodized been sanded on some in prep. I planned to finish them off but I could use the money for my new motor more. $1300 price dropped to $1200 plus shipping
I have a single 14" Original fuch with some nicks. Be great for a spare $150 shipped CONUS Sold! Thanks Mark & enjoy
I also have an original set of 930 fuchs. 16x9,16x7 bit of curb rash on them but good straight wheels. $2800 I'll get some pics later if anyone is interested. Stashed at my work office
Attached thumbnail(s)
Posted by: euro911 Jan 31 2020, 02:24 AM
PM sent on the 14" wheel
Posted by: burton73 Jan 31 2020, 01:21 PM
Hi Jamie,
Are the 8s x 16 911 numbers or are they 951 numbers.
Thanks,
Bob B
Posted by: JRust Jan 31 2020, 04:17 PM
Hi Jamie,
Are the 8s x 16 911 numbers or are they 951 numbers.
Thanks,
Bob B
951 bob. Sorry thought I put that in. I'll go add that now.
Posted by: BENBRO02 Feb 1 2020, 06:45 PM
Is there a difference between 16x8s with 951 or 911 part #?
Posted by: burton73 Feb 1 2020, 07:18 PM
Is there a difference between 16x8s with 951 or 911 part #?
The deeper look. A 911 number looks like a 9 inch and the 951 looks like a 7in Fuchs but is 8 inch wide.
Really is the perfect 914 wheel but the stock rear fender needs a rolling a little to fit just like a 7in x 16 Fuchs
The extra 1in is to the inside of the wheel or say the inside of the car.
Bob B
Posted by: BENBRO02 Feb 1 2020, 08:02 PM
Is there a difference between 16x8s with 951 or 911 part #?
The deeper look. A 911 number looks like a 9 inch and the 951 looks like a 7in Fuchs but is 8 inch wide.
Really is the perfect 914 wheel but the stock rear fender needs a rolling a little to fit just like a 7in x 16 Fuchs
The extra 1in is to the inside of the wheel or say the inside of the car.
Bob B
I'm planning a flared six conversion eventually. I think you're saying a 911 16x8 wheel would be better for a flared car.
Posted by: mepstein Feb 1 2020, 08:05 PM
Is there a difference between 16x8s with 951 or 911 part #?
The 8' - 951's are a favorite with the 911 crowd because you can run them on the front vs an 8' - 911 wheel that usually won't clear the fender.
Posted by: BENBRO02 Feb 1 2020, 08:24 PM
Thanks Bob and Mark.
Posted by: JRust Feb 5 2020, 12:56 PM
Reduced price again $1200 
Posted by: mepstein Feb 5 2020, 01:22 PM
Should be an easy sale on pelican.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)