Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ Sheet Metal Needed

Posted by: xsurfer Feb 29 2020, 11:37 AM

I need a piece of sheet metal cut from the inside right fender.
My car is a six however I think they are all the same. If you have
a car you are parting please let me know.

Thanks

Gene

Posted by: bdstone914 Feb 29 2020, 12:01 PM

@http://www.914world.com/bbs2/index.php?showuser=5818
date='Feb 29 2020, 11:37 AM' post='2790265']
I need a piece of sheet metal cut from the inside right fender.
My car is a six however I think they are all the same. If you have
a car you are parting please let me know.

Thanks

Gene
[/quote]

Can you post a picture of the area need ? Front or rear ?

I have a parts car that is getting cut.

Bruce

Posted by: xsurfer Feb 29 2020, 01:33 PM

[quote name='bdstone914' date='Feb 29 2020, 10:01 AM' post='2790270']
@http://www.914world.com/bbs2/index.php?showuser=5818
date='Feb 29 2020, 11:37 AM' post='2790265']
I need a piece of sheet metal cut from the inside right fender.
My car is a six however I think they are all the same. If you have
a car you are parting please let me know.

Thanks

Gene
[/quote]

Can you post a picture of the area need ? Front or rear ?

I have a parts car that is getting cut.

Bruce
[/quote]

Bruce,

That's terrific! I know you from years ago at the Riverside
Flesh eating swap meet.

You might know exactly what section I need. I have a factory six
that was damaged at the fuel pump mounting area of the inside right
inside fender. I need to cut a section out of the inside fender. I'll work on
getting a picture and measurements today.

Are you still in the Riverside area?

Thanks

Gene Selger
gene@eselger.com
8189575791

Posted by: xsurfer Feb 29 2020, 09:17 PM

Bruce,

Thanks for the phone call. I don't have your phone number.

I need the right side sheet metal 8 inches back. I will attempt
a photo of the area tomorrow.

Thanks

Gene





[quote name='xsurfer' date='Feb 29 2020, 11:33 AM' post='2790289']
[quote name='bdstone914' date='Feb 29 2020, 10:01 AM' post='2790270']
@http://www.914world.com/bbs2/index.php?showuser=5818
date='Feb 29 2020, 11:37 AM' post='2790265']
I need a piece of sheet metal cut from the inside right fender.
My car is a six however I think they are all the same. If you have
a car you are parting please let me know.

Thanks

Gene
[/quote]

Can you post a picture of the area need ? Front or rear ?

I have a parts car that is getting cut.

Bruce
[/quote]

Bruce,

That's terrific! I know you from years ago at the Riverside
Flesh eating swap meet.

You might know exactly what section I need. I have a factory six
that was damaged at the fuel pump mounting area of the inside right
inside fender. I need to cut a section out of the inside fender. I'll work on
getting a picture and measurements today.

Are you still in the Riverside area?

Thanks

Gene Selger
gene@eselger.com
8189575791
[/quote]

Posted by: xsurfer Mar 1 2020, 10:37 AM

[quote name='bdstone914' date='Feb 29 2020, 10:01 AM' post='2790270']
@http://www.914world.com/bbs2/index.php?showuser=5818
date='Feb 29 2020, 11:37 AM' post='2790265']
I need a piece of sheet metal cut from the inside right fender.
My car is a six however I think they are all the same. If you have
a car you are parting please let me know.

Thanks

Gene
[/quote]

Can you post a picture of the area need ? Front or rear ?

I have a parts car that is getting cut.

Bruce
[/quote]


Bruce the sheet metal behind the fuel pump is what I need.
I need 8 inches to the rear of the fire wall. The area reequired
is the slanted area visible from the engine compartment. On a
four cyl. car there is nothing there to the best of my knowledge.
Please email me your phone number.

Thanks


Attached thumbnail(s)
Attached Image

Posted by: xsurfer Mar 1 2020, 05:58 PM

Sunday 3/1/20

Sent the picture earlier however I don't see it. I've tried again to
attach the photo. Please let me know if you get it.



[quote name='xsurfer' date='Feb 29 2020, 07:17 PM' post='2790379']
Bruce,

Thanks for the phone call. I don't have your phone number.

I need the right side sheet metal 8 inches back. I will attempt
a photo of the area tomorrow.

Thanks

Gene





[quote name='xsurfer' date='Feb 29 2020, 11:33 AM' post='2790289']
[quote name='bdstone914' date='Feb 29 2020, 10:01 AM' post='2790270']
@http://www.914world.com/bbs2/index.php?showuser=5818
date='Feb 29 2020, 11:37 AM' post='2790265']
I need a piece of sheet metal cut from the inside right fender.
My car is a six however I think they are all the same. If you have
a car you are parting please let me know.

Thanks

Gene
[/quote]

Can you post a picture of the area need ? Front or rear ?

I have a parts car that is getting cut.

Bruce
[/quote]

Bruce,

That's terrific! I know you from years ago at the Riverside
Flesh eating swap meet.

You might know exactly what section I need. I have a factory six
that was damaged at the fuel pump mounting area of the inside right
inside fender. I need to cut a section out of the inside fender. I'll work on
getting a picture and measurements today.

Are you still in the Riverside area?

Thanks

Gene Selger
gene@eselger.com
8189575791
[/quote]
[/quote]
Attached Image

Posted by: xsurfer Mar 1 2020, 05:59 PM

Sunday 3/1/20

Sent the picture earlier however I don't see it. I've tried again to
attach the photo. Please let me know if you get it.



[quote name='xsurfer' date='Feb 29 2020, 07:17 PM' post='2790379']
Bruce,

Thanks for the phone call. I don't have your phone number.

I need the right side sheet metal 8 inches back. I will attempt
a photo of the area tomorrow.

Thanks

Gene





[quote name='xsurfer' date='Feb 29 2020, 11:33 AM' post='2790289']
[quote name='bdstone914' date='Feb 29 2020, 10:01 AM' post='2790270']
@http://www.914world.com/bbs2/index.php?showuser=5818
date='Feb 29 2020, 11:37 AM' post='2790265']
I need a piece of sheet metal cut from the inside right fender.
My car is a six however I think they are all the same. If you have
a car you are parting please let me know.

Thanks

Gene
[/quote]

Can you post a picture of the area need ? Front or rear ?

I have a parts car that is getting cut.

Bruce
[/quote]

Bruce,

That's terrific! I know you from years ago at the Riverside
Flesh eating swap meet.

You might know exactly what section I need. I have a factory six
that was damaged at the fuel pump mounting area of the inside right
inside fender. I need to cut a section out of the inside fender. I'll work on
getting a picture and measurements today.

Are you still in the Riverside area?

Thanks

Gene Selger
gene@eselger.com
8189575791
[/quote]
[/quote]

Posted by: xsurfer Mar 4 2020, 07:31 AM


Haven't heard from you since I sent picture, r u ok?

Thanks
Gene




[quote name='bdstone914' date='Feb 29 2020, 10:01 AM' post='2790270']
@http://www.914world.com/bbs2/index.php?showuser=5818
date='Feb 29 2020, 11:37 AM' post='2790265']
I need a piece of sheet metal cut from the inside right fender.
My car is a six however I think they are all the same. If you have
a car you are parting please let me know.

Thanks

Gene
[/quote]

Can you post a picture of the area need ? Front or rear ?

I have a parts car that is getting cut.

Bruce
[/quote]

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)