Here's a complete set of driver quality stainless steel and anodized alumimum trims for the targa bar and sail panels. No extra holes, no bends, no big dents. The long piece along the back top of the targa bar, and the two short rub strips, do have pits from rubbing against the targa top seals. Some blue overspray on a few parts. Some fixing clips are included as shown. SOLD! $150 shipped for all parts.
thanks,
Carl
Carl-
I wish timing was better....I hope to attempt to restore these in the future. I believe I can, just a matter of keeping $$$ down.
I've done some intricate repairs on some early Ford side moldings with great results.
Oscar
The spacers on the back of the curved sail panel trim are worth gold! They are NLA and can't even get them when you buy the trim new.
I'll take them if they will fit a '75
@http://www.914world.com/bbs2/index.php?showuser=16669 , how much would you charge to help me clean these up like you did for the Ford moulding's?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)