Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ Misc Parts, Cleaning out parts stash more to come

Posted by: tyfighter123 Apr 9 2020, 10:26 AM

Pm me for pictures I have the following for sale.... lots more to come.

Sachs kit with clutch disc and pressure plate sightly used part #901.116.001.01 $100 +actual shipping

Used set of P&C Mahle 94mm $150 +actual shipping

2.0 Alternator used. $100 +actual shipping

Set of Koni rear shocks 82K-1722 used. $100 +actual shipping.

Fog lights I have both Early (round) and square (late) sets. $100 per set +actual shipping

If prices are not in line I am also open to offers. More to come thanks guys.Attached Image

Posted by: abes914 Apr 9 2020, 10:57 AM

Interested in the clutch kit. Can you please send pictures?

Thanks

Posted by: Literati914 Apr 9 2020, 11:31 AM

Got an early set of rear hubs ?

Posted by: tyfighter123 Apr 9 2020, 12:04 PM

I should let me get out there and take some pictures. Pm me your email.

QUOTE(Literati914 @ Apr 9 2020, 11:31 AM) *

Got an early set of rear hubs ?


Posted by: Retroracer Apr 9 2020, 01:15 PM

Alway on the lookout for early chrome dot 914 or 911 tachs, if you have any in your stash...?

- Tony

Posted by: tyfighter123 Apr 9 2020, 09:23 PM

Yes I have some. Pm your email and I will send you pictures.


QUOTE(Retroracer @ Apr 9 2020, 01:15 PM) *

Alway on the lookout for early chrome dot 914 or 911 tachs, if you have any in your stash...?

- Tony


Posted by: tyfighter123 Apr 11 2020, 09:55 AM

More parts added, I have lots of parts several cars worth if you need anything let me know.


Posted by: Pappy1975 Apr 11 2020, 11:02 AM

Do you have the top cylinder engine tins for a 2.0L?

Posted by: Stark 01 Apr 13 2020, 03:24 PM

Hi, I’m looking for the rear deck lid, hinges, torsion bars and mounting hardware. (In front of trunk).

Posted by: frostyf Apr 13 2020, 04:02 PM

Hi, Its only small but wondered if you've got the clip that holds the cover for the frunk cable where it goes into the lower cable lock mechanism. Should be part 311-823-567 and item 22 in this schematic??

Thanks Nick

Posted by: tyfighter123 Apr 13 2020, 04:57 PM

I have responded to all messages. I shipped out several parts Saturday and today!

Posted by: Tdskip Apr 13 2020, 06:20 PM

Interested in any good rubber seals / trim for a 73 - 74.

Thanks.

Posted by: tyfighter123 Apr 18 2020, 09:56 AM

Bump!

Posted by: wurthBob Apr 18 2020, 04:10 PM

do you have any early lap belts?

Posted by: tp coop Apr 18 2020, 04:30 PM

Any body panels?

1974 - front cross panel, driver side headlight housing, front trunk corner lower reinforcement, and reinforcement plate ( the one with two 2 1/2" holes in it.)


Posted by: joeswaim Apr 20 2020, 07:30 AM

Do you have late (2 bleeder) rear right brake caliper for a 1.7 ?
Thanks

Joe

Posted by: 6s219 Apr 20 2020, 08:57 AM

I am looking for under engine sheet metal parts. Please let me know if you have anything. Thank You

Posted by: tyfighter123 Apr 20 2020, 01:56 PM

Replied to all PM's. Make me an offer on these parts guys I am looking to clean out space.

Tyler

Posted by: Costa05 Apr 20 2020, 09:56 PM

Looking for rear trunk push button lock, and upper bracket with spring. Also driver side outside door handle.

Posted by: tyfighter123 Apr 20 2020, 10:05 PM

QUOTE(Costa05 @ Apr 20 2020, 09:56 PM) *

Looking for rear trunk push button lock, and upper bracket with spring. Also driver side outside door handle.


Check your inbox!
piratenanner.gif

Posted by: sjhenry1075 Apr 21 2020, 06:05 AM

I need a headlight and hazard switch.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)