Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB - Lights for Fresh air controls
Posted by: BPic Apr 26 2020, 03:10 PM
So I think, mine were missing, that there is a single light that is grounded to the fresh air control and then there are 3 others that come on with the dash lights. I need all four with pigtail wires, good bulbs is a plus but I'll swap to LED ultimately.
Anybody have anything? TIA!
Getting closer!
Posted by: FlacaProductions Apr 26 2020, 05:23 PM
Check this thread for number of lamps back there -
http://www.914world.com/bbs2/index.php?showtopic=103791
specifically:
"There are 2 lights on the heater control activated with the dash lights - one lower left and one lower right (at least on a '73). The red light on the left is not wired by default (on a '73 anyway), but there is a socket for a bulb. You can wire the bulb to either the lead for the dash-activated lights (if you want it to work only when the lights are on) or otherwise to the cigarette hot lead or your stereo hot lead, and then run the ground for the bulb to the heater control level between the seats. I'm pretty sure the heater control lever already acts as the ground for the heater blower motor, so it should be easy enough to hook up another wire."
Other threads:
http://www.914world.com/bbs2/index.php?showtopic=92048&hl=Fresh+air+fan
http://www.914world.com/bbs2/index.php?showtopic=318185
http://www.914world.com/bbs2/index.php?showtopic=141091
http://www.914world.com/bbs2/index.php?showtopic=112769
LEDs - I think these are one possibility:
https://www.superbrightleds.com/search/led-products/2721/
Posted by: BPic Apr 26 2020, 05:30 PM
Check this thread for number of lamps back there -
http://www.914world.com/bbs2/index.php?showtopic=103791
specifically:
"There are 2 lights on the heater control activated with the dash lights - one lower left and one lower right (at least on a '73). The red light on the left is not wired by default (on a '73 anyway), but there is a socket for a bulb. You can wire the bulb to either the lead for the dash-activated lights (if you want it to work only when the lights are on) or otherwise to the cigarette hot lead or your stereo hot lead, and then run the ground for the bulb to the heater control level between the seats. I'm pretty sure the heater control lever already acts as the ground for the heater blower motor, so it should be easy enough to hook up another wire."
Other threads:
http://www.914world.com/bbs2/index.php?showtopic=92048&hl=Fresh+air+fan
http://www.914world.com/bbs2/index.php?showtopic=318185
http://www.914world.com/bbs2/index.php?showtopic=141091
http://www.914world.com/bbs2/index.php?showtopic=112769
LEDs - I think these are one possibility:
https://www.superbrightleds.com/search/led-products/2721/
Thanks @http://www.914world.com/bbs2/index.php?showuser=21628 good info. Maybe for the different colors I can order colored bulbs?
Still need the sockets.
Posted by: 914_7T3 Apr 26 2020, 07:34 PM
amazon.com
Posted by: FlacaProductions Apr 26 2020, 08:13 PM
Jeffrey's right on the incandescent versions - if you do go LED, yes - put the same color in as the lens: red behind red, blue behind blue, etc....
Someone here will have the sockets - @http://www.914world.com/bbs2/index.php?showuser=1319 @http://www.914world.com/bbs2/index.php?showuser=865 ??
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)