Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ RD inner suspension console
Posted by: mepstein May 11 2020, 07:33 PM
Restoration Design inner suspension console. If you have bad hell hole rust or your rear passenger wheel is starting to lean in at the top, it’s might be time to replace your rear suspension console. Along with the new console, I’m including the reinforcement ties from 914rubber that help secure the console to the rear longitudinal. Regular price without the 3 reinforcement ties is $259. I’m selling for $199 + ship, extra parts included. Email - Mark@MarkEpstein.net to purchase.
Attached thumbnail(s)
Posted by: stevegm May 11 2020, 08:39 PM
PM sent
Posted by: peteyd May 12 2020, 06:03 AM
that looks NOS to me
Posted by: Superhawk996 May 12 2020, 07:00 AM
Mark,
Is there any chance you'd be willing to trace the flat sheet metal ties at full size and scan to PDF?
Would be super helpful vs. having to make my own templates from scratch in the future.
@http://www.914world.com/bbs2/index.php?showuser=10825
Posted by: mepstein May 12 2020, 07:09 AM
that looks NOS to me
Pete - How do I tell? I was under the impression that the “wrinkle” was aftermarket but I’m certainly no expert.
@http://www.914world.com/bbs2/index.php?showuser=8858
Attached thumbnail(s)
Posted by: mepstein May 12 2020, 03:47 PM
I have expert confirmation it's an RD reproduction. @http://www.914world.com/bbs2/index.php?showuser=17633 is first in line.
Posted by: Literati914 May 12 2020, 03:58 PM
that looks NOS to me
Pete - How do I tell? I was under the impression that the “wrinkle” was aftermarket but I’m certainly no expert.
I would have guessed the same.. some NOS volvo parts I picked up for my '71 1800E looked the same with the oxide colored primer and labeling.
.
Posted by: mepstein May 12 2020, 04:54 PM
that looks NOS to me
Pete - How do I tell? I was under the impression that the “wrinkle” was aftermarket but I’m certainly no expert.
I would have guessed the same.. some NOS volvo parts I picked up for my '71 1800E looked the same with the oxide colored primer and labeling.
.
Yes. I was told the red oxide is correct but as I first thought, it’s an RD reproduction. Certainly not a bad thing. RD is the only one making this part and it’s a very common failure point.
Posted by: Superhawk996 May 12 2020, 05:50 PM
Now if we could only get them makeing the Driver side console. These babies are getting old. I can't be the only with a stress cracked driver side. 
@http://www.914world.com/bbs2/index.php?showuser=8858
Posted by: BeatNavy May 12 2020, 06:15 PM
Mark,
Is there any chance you'd be willing to trace the flat sheet metal ties at full size and scan to PDF?
Would be super helpful vs. having to make my own templates from scratch in the future.
@http://www.914world.com/bbs2/index.php?showuser=10825
@http://www.914world.com/bbs2/index.php?showuser=1608 sent me that a couple of years ago, and before I could ever get around to fabbing them 914 Rubber started making them:
https://900designs-container.zoeysite.com/trailing-arm-suspension-gusset-set-by-cary-1
I'll look around to see if I can find the paper templates Cary sent me, but they may be back at my old house.
Posted by: mepstein May 12 2020, 06:23 PM
Mark,
Is there any chance you'd be willing to trace the flat sheet metal ties at full size and scan to PDF?
Would be super helpful vs. having to make my own templates from scratch in the future.
@http://www.914world.com/bbs2/index.php?showuser=10825
@http://www.914world.com/bbs2/index.php?showuser=1608 sent me that a couple of years ago, and before I could ever get around to fabbing them 914 Rubber started making them:
https://900designs-container.zoeysite.com/trailing-arm-suspension-gusset-set-by-cary-1
I'll look around to see if I can find the paper templates Cary sent me, but they may be back at my old house.
Rob - I have Phil covered. I have an extra set I’ll never use so they are headed his way.
@http://www.914world.com/bbs2/index.php?showuser=17042
Posted by: BeatNavy May 12 2020, 06:33 PM
Mark,
Is there any chance you'd be willing to trace the flat sheet metal ties at full size and scan to PDF?
Would be super helpful vs. having to make my own templates from scratch in the future.
@http://www.914world.com/bbs2/index.php?showuser=10825
@http://www.914world.com/bbs2/index.php?showuser=1608 sent me that a couple of years ago, and before I could ever get around to fabbing them 914 Rubber started making them:
https://900designs-container.zoeysite.com/trailing-arm-suspension-gusset-set-by-cary-1
I'll look around to see if I can find the paper templates Cary sent me, but they may be back at my old house.
Rob - I have Phil covered. I have an extra set I’ll never use so they are headed his way.
@http://www.914world.com/bbs2/index.php?showuser=17042
Posted by: Superhawk996 May 13 2020, 05:23 AM
Thanks Guys -- as always the willingness to help a fellow teener blows me away! 
Posted by: mepstein May 13 2020, 07:01 PM
suspension console is still for sale.
Posted by: mepstein May 17 2020, 07:59 PM
Bump 
Posted by: Mikey914 May 19 2020, 12:06 AM
Got plenty in stock, so just let me know if you need multiples I'm sure we can work something out
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)