Printable Version of Topic

Posted by: super9064 Jun 16 2020, 10:25 AM

Looking for a lug bolt for my American racing wheel. Does anyone have extra lug bolts for these wheels? I need just one but would buy a complete or partial set.



Thanks, Rob

Posted by: jmz Jun 16 2020, 10:43 AM

Just One?

Posted by: super9064 Jun 16 2020, 11:43 AM

Yes, I need just one, but would buy a complete or partial set

Posted by: theer Jun 17 2020, 02:14 PM

No expert here, and I do not have what you are looking for but.... are you sure you have the correct lugs? That one looks more like the style for Minilite rims.. which may, or course, be the same as your American Racing wheels... you may want to double check.

Also, that picture does not look like a "lug bolt" but rather a lug nut which has pulled the stud out of the hub. (see the break in the thread pattern about 1/2" up). You'll want to get all studs & nuts or all lug bolts.

good luck!

Posted by: sixnotfour Jun 17 2020, 04:58 PM

that's how they do em esp. now you have to buy 1/2-20 or 12mm,
to get a n acorn nut with the proper dia. , common vw step stud.
I bet the od of the nut is .685...

Posted by: bdstone914 Jun 17 2020, 05:06 PM

@http://www.914world.com/bbs2/index.php?showuser=10589
' date='Jun 16 2020, 09:25 AM' post='2825593']
Looking for a lug bolt for my American racing wheel. Does anyone have extra lug bolts for these wheels? I need just one but would buy a complete or partial set.

Thanks, Rob


I have some., have to get a count tomorrow. Used to have about 12.

Posted by: Boomingbeetle Jun 21 2020, 03:29 PM

I can confirm you have the correct stud and “Mag-wheel” style shoulder lug with the (.62”?) diameter shoulder. I have the same set of wheels and needed to do the same. They are magnesium and very light. Look amazing when polished in my opinion.

I also have a few spares of this wheel type, in two size width. 15” x 5.5 and 6” width if I remember correctly, in case you’re ever in need of a spare. I’m in the Denver Area.