Part # 022903646 THe curved bracket that attaches to the top of the alt.
2NDLY, i need the plastic cover that kinda goes between the pulley and the alt tin.
Who can help?
I can, but there are 2 types of alt. tin & plastic heat shield.
Can you provide a pic of yours?
Im sure one is early & one is late but Im not sure which is which.
One style the tin has a large circular opening and a flat ovoid plastic infill,
the other has a smaller opening with a symmetrical round plastic filler.
I know a pic is worth a 1000 words.
Not sure were this one came from. Guessing a 72 914 1.7. It's diameter is 4-3/8”.
Do you know why the are different? (Large opening, small opening)
I have one out of a bus too
The 72 bus one. It also has a hole for the dip stick tube.
5-5/8” diameter. It is bent up a bit, so i figured i would use the small, straight one.
@http://www.914world.com/bbs2/index.php?showuser=13139
I have the parts you were looking for if you still need them.
Carl
Ya I drew a BLANK. They will turn up as soon as Im not looking for them.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)