Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB - lug bolts for steel wheels
Posted by: mepstein Jul 21 2020, 01:41 PM
I need the shorter lug bolts for a set of steel wheels. A partial set is ok and condition isn't important. I just need them for a roller so I can mount the wheels and move it around the garage. Cheaper the better. Please PM or mark@markepstein.net
Thanks
Posted by: brant Jul 21 2020, 02:01 PM
I will look this afternoon... get back to you in an hour or two
I have a coffee can full of them
was going to recycle them
I'll check... I don't think they went in the last load, but will check
yours for shipping
let me verify I have them
brant
Posted by: mepstein Jul 21 2020, 02:22 PM
I will look this afternoon... get back to you in an hour or two
I have a coffee can full of them
was going to recycle them
I'll check... I don't think they went in the last load, but will check
yours for shipping
let me verify I have them
brant
Posted by: ndfrigi Jul 21 2020, 02:29 PM
I think I have some assorted short lugbolts for 914 also. I will check how many if Brant does not have complete sets I can send some and maybe free shipping.
Posted by: mepstein Jul 21 2020, 02:50 PM
Thanks guys
Posted by: brant Jul 21 2020, 03:21 PM
Ok, found them
so something I had not noticed before
13 are short
3 are less short
I haven't owned any bugs, beetles, or VW's other than the 914
so they should have all come from a 914
but still weird that 3 are a bit longer?
makes no sense.
anyone have an opinion or idea
your welcome to them all
I just want to make sure they will work for you
here are pics:
Attached thumbnail(s)
Posted by: brant Jul 21 2020, 03:22 PM
closer
Attached thumbnail(s)
Posted by: mepstein Jul 21 2020, 03:33 PM
Ok, found them
so something I had not noticed before
13 are short
3 are less short
I haven't owned any bugs, beetles, or VW's other than the 914
so they should have all come from a 914
but still weird that 3 are a bit longer?
makes no sense.
anyone have an opinion or idea
your welcome to them all
I just want to make sure they will work for you
here are pics:
Yea, I've seen different lengths. But These will work fine. I can get away with 3 bolts per wheel. The wheels just have to keep the car off the ground. It won't get driven.
I have alloy wheel bolts and they are too long. They bottom out before they get tight.
A good reminder to keep some short ones with your steel spare.
Posted by: brant Jul 21 2020, 03:35 PM
Ok, found them
so something I had not noticed before
13 are short
3 are less short
I haven't owned any bugs, beetles, or VW's other than the 914
so they should have all come from a 914
but still weird that 3 are a bit longer?
makes no sense.
anyone have an opinion or idea
your welcome to them all
I just want to make sure they will work for you
here are pics:
Yea, I've seen different lengths. But These will work fine. I can get away with 3 bolts per wheel. The wheels just have to keep the car off the ground. It won't get driven.
I have alloy wheel bolts and they are too long. They bottom out before they get tight.
A good reminder to keep some short ones with your steel spare.
PM me a shipping address when you have time
I'll get them into a double bag/envelope
brant
Posted by: bdstone914 Jul 21 2020, 04:18 PM
@http://www.914world.com/bbs2/index.php?showuser=47
Most of those are VW bolts. They are too short to work on 914 rear where they have to go thru the rotor then into the hub.
@http://www.914world.com/bbs2/index.php?showuser=10825
I have a set pulled which you can have for $10 to cover the shipping.
Bruce
Posted by: brant Jul 21 2020, 04:35 PM
Bruce
thank you.
weird that I have them
but you know your parts!
Mark,
I can still send you the 3 if you want them
or what ever your prefer
brant
Posted by: mepstein Jul 21 2020, 05:05 PM
@http://www.914world.com/bbs2/index.php?showuser=47
Most of those are VW bolts. They are too short to work on 914 rear where they have to go thru the rotor then into the hub.
@http://www.914world.com/bbs2/index.php?showuser=10825
I have a set pulled which you can have for $10 to cover the shipping.
Bruce
Thanks Bruce.
Posted by: mepstein Jul 21 2020, 05:05 PM
Bruce
thank you.
weird that I have them
but you know your parts!
Mark,
I can still send you the 3 if you want them
or what ever your prefer
brant
Brant - no need but thank you.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)