Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ FS Rear Alignment Rear shims, 1, 2, 3 & 4mm thickness

Posted by: bdstone914 Jul 23 2020, 12:12 PM

I have a bunch of alignment shims. I had the 1mm made in mild steel to allow finer alignment adjustment. The 2, 3, and 4 mm shims are replated in yellow zinc.

Two for $20, Four for $35, Six for $50, Eight for $65 shipped

I suggest a assortment of two 4mm, four 2mm and two 1mm. That should be more than enough for most cars. If you need more your trailing arm bushings are probably shot.

Attached thumbnail(s)

Posted by: BPic Jul 23 2020, 12:17 PM

I'll take a set of 2 - 1mm - 2 -2mm and 2 - 4 mm

I'll send $50 PP now. Thanks Bruce

Posted by: live free & drive Jul 23 2020, 02:07 PM

I'll take a set of 8 as suggested - PP tonight

Posted by: ahycaramba Jul 23 2020, 05:57 PM

I'm in for the suggested assortment of 8 shims.
Thanks

Al

Posted by: bdstone914 Jul 23 2020, 06:41 PM

QUOTE(ahycaramba @ Jul 23 2020, 04:57 PM)

I'm in for the suggested assortment of 8 shims.
Thanks

Al

Thanks Al,

Got a set wrapped for you.

Bruce

Posted by: Luke M Jul 23 2020, 08:21 PM

Hi Bruce,

I'll take four of the 1 mm shims. If you could put them with the other
Parts you have set aside for me. Thanks

Posted by: stevie 77 930 Jul 24 2020, 12:14 PM

I ll take a complete set of 8 shims

PayPal sent to you Bruce.

Thanks

Steve

Posted by: G e o r g e Jul 24 2020, 02:04 PM

I will take a set of 8 if still available