These are the parts that weld to the interior floor cross member. The passenger side is needed when a fixed seat is replaced with a movable seat. When the cross member is replaced these need to be removed from the old cross member and welded into the new cross member.
I have about a dozen of each side made.
Bracket cost is $20 each for left or right or a pair for $35.
Combs are $12 each, two for $20.
Bundle of two combs and two brackets with hardware $50
Bolts pictured are too long. For illustration only.
@http://www.914world.com/bbs2/index.php?showuser=581
@http://www.914world.com/bbs2/index.php?showuser=1608
Attached image(s)
Excellent!
Awesome.
I'll take a pair of the brackets assuming the $35 is shipped, that will save me some fab time down the road.
Pet peeve - I know fasteners were for illustrative purpose, but, ditch the lockwashers they are literally worthless and serve no locking function whatsoever. Plain washer - lockwasher
I know . . I'm a jackass!
Thanks for making these!
Do you prefer F&F or purcase good for shipping via Paypal?
@http://www.914world.com/bbs2/index.php?showuser=22428
I'll take a pair of the brackets assuming the $35 is shipped, that will save me some fab time down the road.
Pet peeve - I know fasteners were for illustrative purpose, but, ditch the lockwashers they are literally worthless and serve no locking function whatsoever. Plain washer - lockwasher
I know . . I'm a jackass!
Thanks for making these!
Do you prefer F&F or purcase good for shipping via Paypal?
[/quote]
Yes $35 shipped.
Do NOT send as F & F. My pet peeve. It removes your address, eliminates the shipping discount and does not save the seller on small dollar buys like this.
I am interested why you say lock washers are worthless. You are not a jackass. I respect your knowledge as an engineer. I know who the jackasses are on this board.
I have the correct length bolts on order. Should be to me on Monday. Will provide flat washers. I normally like to provide the same hardware as OE or better.
Bruce,
I'll take a passenger side (right side) bracket. I'll PP you. Please confirm your PP address for me.
Thanks,
Gary
Bruce, PP for $20 for right side bracket sent to you.
Thanks,
Gary
I'll take a set of these please:
Bundle of two combs and two brackets with hardware $50
Can you send me the PayPal info please.
Thanks,
Pedro
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)