Printable Version of Topic

Posted by: trick-e Aug 16 2020, 12:20 PM

Have two leaky injectors. Seals replaced to no avail. Look to be leaking where the green plastic plug part meets the metal body.

Posted by: Superhawk996 Aug 16 2020, 12:27 PM

Send to Mr. Injector. Something like $17 + shipping if he fixes it. If not fixable, no charge assuming you don't want them back. Wouldn't hurt to send all 4 that way they all get cleaned and flow tested.

Posted by: 914werke Aug 16 2020, 12:55 PM

If they are leaking at the body they are done.
Ive been using Gordon at Witchhunter for years cuz he was (practically) my neighbor but he recently moved & his backlog was huge so I sent some to Bill at Mr.
Out of 8 I sent, 6 were found leaking at the body & he tossed em.

Posted by: trick-e Aug 16 2020, 01:30 PM

Messages sent to both Mr. Injector and Witchhunter. I’m putting the feelers out.
Thank you

Posted by: Superhawk996 Aug 16 2020, 04:20 PM

My bad. When I read that I thought you meant leaking at the pintle tip (sometimes green too). Would completely agree that if they are leaking at the green end with the electrical connector they aren't worth sending.

Sorry that I read that incorrectly.

Posted by: 914Sixer Aug 16 2020, 05:35 PM

Find you some FJ67 by Standard Motor Products. $72.43 over at PartsGeek.

Posted by: trick-e Aug 16 2020, 07:33 PM

Every place is out of stock. Summit, parts geek, Amazon...