Posted by: RolinkHaus Oct 15 2020, 09:07 AM
WTB: Engine Lift Support or something similiar.
Posted by: bdstone914 Oct 15 2020, 09:18 AM
QUOTE(RolinkHaus @ Oct 15 2020, 08:07 AM)
WTB: Engine Lift Support or something similiar.
Get it from Tangerine Racing. I was lucky enough to find a used one locally and save shipping.
Posted by: GregAmy Oct 15 2020, 09:38 AM
http://www.tangerineracing.com/tools.htm
Posted by: RolinkHaus Oct 15 2020, 11:45 AM
Thanks, I am assuming I can use this to install that flat6 also?
Posted by: GregAmy Oct 15 2020, 12:22 PM
QUOTE(RolinkHaus @ Oct 15 2020, 01:45 PM)
Thanks, I am assuming I can use this to install that flat6 also?
From the web page: "(not for 6 cyl engines)"
Posted by: Dominic Oct 15 2020, 08:29 PM
QUOTE(RolinkHaus @ Oct 15 2020, 10:45 AM)
Thanks, I am assuming I can use this to install that flat6 also?
Get yourself an ATV jack from Harbor Freight, works well for both -6 and -4 engines.
Posted by: pt_700 Oct 16 2020, 10:10 PM
QUOTE(Dominic @ Oct 15 2020, 07:29 PM)
QUOTE(RolinkHaus @ Oct 15 2020, 10:45 AM)
Thanks, I am assuming I can use this to install that flat6 also?
Get yourself an ATV jack from Harbor Freight, works well for both -6 and -4 engines.
one of these?
https://www.harborfreight.com/1500-lb-steel-atvmotorcycle-lift-60536.html
i'm getting closer to drivetrain install and lacking confidence in the home made wooden bracket i used for removal with a rolling floor jack...
i'm guessing you put the lift in with the pedals toward the front of the car? where do you position the engine / trans unit for optimal balance with a 4?
Posted by: Dominic Oct 16 2020, 11:12 PM
QUOTE(pt_700 @ Oct 16 2020, 09:10 PM)
QUOTE(Dominic @ Oct 15 2020, 07:29 PM)
QUOTE(RolinkHaus @ Oct 15 2020, 10:45 AM)
Thanks, I am assuming I can use this to install that flat6 also?
Get yourself an ATV jack from Harbor Freight, works well for both -6 and -4 engines.
one of these?
https://www.harborfreight.com/1500-lb-steel-atvmotorcycle-lift-60536.html
i'm getting closer to drivetrain install and lacking confidence in the home made wooden bracket i used for removal with a rolling floor jack...
i'm guessing you put the lift in with the pedals toward the front of the car? where do you position the engine / trans unit for optimal balance with a 4?
https://www.harborfreight.com/1500-lb-aluminum-atv-motorcycle-lift-63397.html
This is the one I use, but usually have a floor jack under the trans for the 914.