Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ FS Headlight Installation Hardware kits
Posted by: bdstone914 Oct 25 2020, 09:38 AM
I have assembled two different kits for headlight installation.
The A Kit includes:
(6) 4mm SS allan head socket screws and washers to attach the ring to the headlight frame. The original phillips head screws are prone to stripping out the heads. The allan heads allow more secure installation to prevent them from dropping down the bucket. The washers distribute the load on the tab for less distortion.
(6) 4.2 mm SS oval head screws to attach the cover to the frame.
(6) 4.2 mm SS flat head countersunk screws to attach the headlight surrounds.
Cost $12.50 shipped.
The Kit B includes all of the above and (10) 4.2 zinc plated Tinnerman clips.
cost $17.50 shipped.
Each kit is enough to do both headlights.
The picture shows 12 clips but only 10 are needed and included.
several kits available now and will be offered ongoing
Kit C will be for the installation of the headlight pivot brackets with (4) new yellow zinc plated plates 6mm allan head screws, hardened flat washers, and star washers.
I am short on the washers and bolts but they are on order.
Price is $30 for kit C. Or $25 if ordered with any other kit.
Attached thumbnail(s)
Posted by: DRPHIL914 May 3 2021, 07:35 AM
I have assembled two different kits for headlight installation.
The A Kit includes:
(6) 4mm SS allan head socket screws and washers to attach the ring to the headlight frame. The original phillips head screws are prone to stripping out the heads. The allan heads allow more secure installation to prevent them from dropping down the bucket. The washers distribute the load on the tab for less distortion.
(6) 4.2 mm SS oval head screws to attach the cover to the frame.
(6) 4.2 mm SS flat head countersunk screws to attach the headlight surrounds.
Cost $12.50 shipped.
The Kit B includes all of the above and (10) 4.2 zinc plated Tinnerman clips.
cost $17.50 shipped.
Each kit is enough to do both headlights.
The picture shows 12 clips but only 10 are needed and included.
several kits available now and will be offered ongoing
Kit C will be for the installation of the headlight pivot brackets with (4) new yellow zinc plated plates 6mm allan head screws, hardened flat washers, and star washers.
I am short on the washers and bolts but they are on order.
Price is $30 for kit C. Or $25 if ordered with any other kit.
@http://www.914world.com/bbs2/index.php?showuser=1319
Bruce, do you have any of these full kits in stock?
also do you have the pivot brackets?
Phil
Posted by: bdstone914 May 3 2021, 08:01 AM
I have assembled two different kits for headlight installation.
The A Kit includes:
(6) 4mm SS allan head socket screws and washers to attach the ring to the headlight frame. The original phillips head screws are prone to stripping out the heads. The allan heads allow more secure installation to prevent them from dropping down the bucket. The washers distribute the load on the tab for less distortion.
(6) 4.2 mm SS oval head screws to attach the cover to the frame.
(6) 4.2 mm SS flat head countersunk screws to attach the headlight surrounds.
Cost $12.50 shipped.
The Kit B includes all of the above and (10) 4.2 zinc plated Tinnerman clips.
cost $17.50 shipped.
Each kit is enough to do both headlights.
The picture shows 12 clips but only 10 are needed and included.
several kits available now and will be offered ongoing
Kit C will be for the installation of the headlight pivot brackets with (4) new yellow zinc plated plates 6mm allan head screws, hardened flat washers, and star washers.
I am short on the washers and bolts but they are on order.
Price is $30 for kit C. Or $25 if ordered with any other kit.
@http://www.914world.com/bbs2/index.php?showuser=1319
Bruce, do you have any of these full kits in stock?
Phil
@http://www.914world.com/bbs2/index.php?showuser=11106
Yes, which kit? A, B, or C ?
Posted by: DRPHIL914 May 3 2021, 08:08 AM
I have assembled two different kits for headlight installation.
The A Kit includes:
(6) 4mm SS allan head socket screws and washers to attach the ring to the headlight frame. The original phillips head screws are prone to stripping out the heads. The allan heads allow more secure installation to prevent them from dropping down the bucket. The washers distribute the load on the tab for less distortion.
(6) 4.2 mm SS oval head screws to attach the cover to the frame.
(6) 4.2 mm SS flat head countersunk screws to attach the headlight surrounds.
Cost $12.50 shipped.
The Kit B includes all of the above and (10) 4.2 zinc plated Tinnerman clips.
cost $17.50 shipped.
Each kit is enough to do both headlights.
The picture shows 12 clips but only 10 are needed and included.
several kits available now and will be offered ongoing
Kit C will be for the installation of the headlight pivot brackets with (4) new yellow zinc plated plates 6mm allan head screws, hardened flat washers, and star washers.
I am short on the washers and bolts but they are on order.
Price is $30 for kit C. Or $25 if ordered with any other kit.
@http://www.914world.com/bbs2/index.php?showuser=1319
Bruce, do you have any of these full kits in stock?
Phil
@http://www.914world.com/bbs2/index.php?showuser=11106
Yes, which kit? A, B, or C ?
C - full kit, - the parts that have the pivot arm and bushing shaft , do you have those too?
Posted by: DRPHIL914 May 3 2021, 08:09 AM
these
Attached thumbnail(s)
Posted by: T.Rick6 May 10 2021, 07:57 AM
I'll take Kit B & C please, Thanks for doing these 
Todd
Posted by: Shivers May 10 2021, 09:37 AM
Wow, very nice! So much time saved for so little cash.
Posted by: Luke M May 10 2021, 09:41 AM
Hi Bruce,
I'd like 2 of the B kits please. I'll pm you later today.
Looking for a few other items as well.
Thanks.
Posted by: 56kabrio May 10 2021, 02:08 PM
Bruce
I would like to get both a B and C kit please.
Thanks
Mack
Posted by: 56kabrio May 10 2021, 02:21 PM
Double post.
Sorry
.
Posted by: frostyf May 10 2021, 09:32 PM
Bruce, can I buy a kit C please :
Kit C will be for the installation of the headlight pivot brackets with (4) new yellow zinc plated plates 6mm allan head screws, hardened flat washers, and star washers.
I am short on the washers and bolts but they are on order.
Price is $30 for kit C. Or $25 if ordered with any other kit.
Can I check payment email for paypal?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)