Printable Version of Topic

Posted by: MM1 Oct 26 2020, 04:32 PM

looking for 2 - NOS SKF - made in Germany rear wheel bearings


alternately FAG's also made in Germany


next in line would be those made Switzerland/Japan

Posted by: Luke M Oct 26 2020, 04:52 PM

Check with 914sixer. I believe he had a set for sale not long ago.

Posted by: 914_7T3 Oct 26 2020, 05:21 PM

@http://www.914world.com/bbs2/index.php?showuser=22105

http://www.914world.com/bbs2/index.php?showtopic=349305&hl=bearing

Posted by: MM1 Oct 26 2020, 06:00 PM

Thank you, Jeffery - hope you are well - and hope we can have tonkotsu at Hakata Ikkousha again one day soon!

Posted by: MM1 Oct 26 2020, 06:03 PM

Gonna let this ride a bit - then we'll know if there are any more German-made SKF's . . .I very much want two!

Posted by: Rich Bontempi Oct 26 2020, 06:39 PM

We have some German Fag 914 rear wheel bearings for $45 each. HPH 650-364-6234 Rich

Posted by: 914bub Oct 26 2020, 07:06 PM

I haven't said anything in the past when I've seen these for sale as I didn't want to step on anyone's sale. That having been said, both SKF and FAG are available and cheap through Rockauto.

Posted by: Rich Bontempi Oct 26 2020, 07:31 PM

You probably missed the part where he was asking for German made bearings. Everyone has cheap lower quality bearings, which is where rock auto fits in. I don’t believe there are anymore real German bearings being made for rear 914 wheel bearings, so they’re probably NOS only! You get what you pay for! After spending hours to replace a 914 rear wheel bearings, I certainly wouldn’t put in a bearing made in Slovakia or Brazil or anywhere else, if I can help it!

Posted by: Rich Bontempi Oct 26 2020, 07:36 PM

FYI, in my 45 years as a shop owner, and being responsible for the quality of parts used, in my customer’s cars, we always considered Fag as a better quality bearing that SKF.

Posted by: 914Sixer Oct 26 2020, 07:38 PM

Rich is right, real NOS German bearings are very hard to find. His offer over in the original thread is a very good price.

Posted by: 914bub Oct 26 2020, 09:02 PM

Suit yourself. I deal with multiple bearings every day. It's what I do for a living now that I don't repair cars for a living. SKF stuff has been great as has Fag. Insisting they are German made is up to you. Having installed all kinds of bearings in both automotive and other applications, I wouldn't hesitate to use SKF or Fag bearings no matter where they were made. If you think installing bearings twice sucks, watch a co-worker wipe out $20,000 worth of thrust bearings that were incorrectly set up in a vertical hollow shaft motor. Talk about a bad day!

Posted by: 914_7T3 Oct 26 2020, 10:23 PM

Me too!

Hope things are well with you!

Posted by: MM1 Oct 27 2020, 12:26 AM

We’re good, thank you, Sir and thank you to all of you for your input and advice.

I’ll go with Rich‘s German goodies.

Sure would love though to hear that someone has gone 50-100k on Timkens.