Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ FS: Early Back pads, koni fronts, gt eng lid, Fuchs 16"

Posted by: Mike D. Nov 19 2020, 01:10 AM

~~Koni Front struts, 82R1730 rebuldable, good pressure but not sure about condition~~ SOLD
Early back pads, one with seat, tell me which one you want. ~~$100 for the full~~ $50 for the others THE FULL BACK WITH GREY IS SOLD
GT Engine lid, needs your back grate and letters $100
Springs, stock set $25
Springs, aftermarket, heavy, not sure rate and narrower than stock $80
~~Fuchs Set, Chrome, 16x6 and 7 Driver condition some flaws in Chrome, the 7s have good tires 2011, 6s are older,~~ SOLD
~~Fuchs 2, 16x6~~ SOLD
-no curb rash on either set, let me know with or without tires, ask in PM

911 3.2 complete exhaust FOR USE IN 911 $800
911 Engine mount FOR USE IN 911 $50
911 3.2 engine tins, missing one piece FOR USE IN 911 $80

~~Empi mufflers, fit 1.7/1.8 to 1974, originally for bus, not sure about fitment with rear valance $20 each~~SOLD
Send PM with questions and for more pics if needed

All prices plus shipping. ALL shipping cost.

Attached thumbnail(s)

Attached image(s)

Posted by: Mike D. Nov 19 2020, 01:11 AM

pics

Attached thumbnail(s)

Posted by: Mike D. Nov 19 2020, 01:13 AM

Wheels Sold

Posted by: Mike D. Nov 19 2020, 01:14 AM

pics - 911 exhaust gone

Posted by: Mike D. Nov 19 2020, 01:16 AM

914 Bus Mufflers sold

Posted by: sfspeed Nov 19 2020, 08:20 AM

Need black back pad. Pm sent

Posted by: Tdskip Nov 19 2020, 10:04 AM

Mike - just to be clear the 911 engine mount and exhaust set up are for a 3.2 as fitted to a 911 rather than to fit a 3.2 to a 914, correct?

Posted by: mb911 Nov 19 2020, 11:00 AM

QUOTE(Tdskip @ Nov 19 2020, 08:04 AM)

Mike - just to be clear the 911 engine mount and exhaust set up are for a 3.2 as fitted to a 911 rather than to fit a 3.2 to a 914, correct?

Yes according to what I see.

Posted by: bob164 Nov 19 2020, 11:50 AM

Mike,
I will take the Konis and early back pads, the one with the grey seat inserts. Check your PMs.
Bob

Posted by: Mike D. Nov 19 2020, 12:12 PM

QUOTE(Tdskip @ Nov 19 2020, 08:04 AM)

Mike - just to be clear the 911 engine mount and exhaust set up are for a 3.2 as fitted to a 911 rather than to fit a 3.2 to a 914, correct?

Yes, they were left overs from 914-6 conversion. I just posted here with everything else just in case someone was interested.

Maybe I should remove them to avoid confusion...

Posted by: Tdskip Nov 19 2020, 12:18 PM

QUOTE(Mike D. @ Nov 19 2020, 01:12 PM)

QUOTE(Tdskip @ Nov 19 2020, 08:04 AM)

Mike - just to be clear the 911 engine mount and exhaust set up are for a 3.2 as fitted to a 911 rather than to fit a 3.2 to a 914, correct?

Yes, they were left overs from 914-6 conversion. I just posted here with everything else just in case someone was interested.

Maybe I should remove them to avoid confusion...

No worries on leaving them, I would, just thought making it clear what they are good for was worthwhile.

Good luck with these bits, someone will want them.