Dear Friends, I am leaving the 914 community. I wish you all the best!
I hope you all can benefit from my exit. I had a 74 sport package car with an L-Jet 1.8. I built the motor up to the Raby-spec 2056 with 96mm P&Cs, new heads and valves and pro-balanced flywheel, cam, crank and squirrel cage. The longblock is assembled, never cranked, and ready for someone to finish. Here is the link to the folder with pics. Everything must go, many parts are free + shipping.
In compliance with the rules: the Motor w or wo fuel system is a negotiable $500 (I have much more in it than that) and the side-shift tranny is $150.
Cheers all!
Rick
https://photos.google.com/share/AF1QipMQPif765qh8Q327OSdsPz_GhXhP2gqgUA-nVECJXXE3kpuB4s6z6Kq9JgD2PDwKw?key=SG82eGhPam5MS0RleHRMenRTNXJjczFGSmNPUnJR
SOLD:
- 2.0 heat exchangers
- window crank handles
- interior door handle inserts
- A & B post pillar covers
- Center console
- Speaker covers
- Motor/Trans
- Plenum/Rear Calipers
- heat deflector assemblies (tins)
- 2.0 ECU and harnesses
- Clutch Cable and shifter bushing parts
- Battery Support Tray
- Clutch Shift rod, Coupler and Cover assembly
Sales Pending:
- Deck lights
- 1.8 fuel injection system
If i have not yet responded to you, I will catch up with you in the morning - you all have been fantastic and patient. Cheers!
Rick
Hi Rick. What would you want for these items shipped to CA 95405?
Attached thumbnail(s)
Hi Rick,
how much for the following I circled from number 1 to 4?
shipped to Stanton, CA 90680.
PM sent for center console with face plate for gauges to mount.
I would like a price shipped for all of the parts in the attached pics. Good job on organizing and taking good pictures of your parts.
No rush. Or a lot price it it is better for you. Would need to be shipped to California. You have a lot of very good parts there. If I were closer I would get the heat exchanges.
I have a friend in Michigan who could use the 2.0 heat exchangers.
Attached thumbnail(s)
Attached image(s)
I'd be interested in the following pictures - Shipped to Florida 33196
Thanks!
I am interested in the black intake plenum and the rear brake calipers.
Let me know what you want for them.
Thanks
PM sent.
How about $100. shipped to 94583 for all red boxed items below. Paypal payment.
Let me know.
Attached thumbnail(s)
PM Sent for the sun visors
Interested in the long block if still available.
Would like center console surround and can pick up; also in Maryland
Interested in the long block; would like more info please.
Hate to see you leave, good luck with any/all new endeavor's.
I would be interested in the shift rod. Will PM you as well.
john
If shift rod still available also interested in coupler.
john
Rick, If you still have the 1.8 heat exchangers, what is the price on them? I live in Southwestern Michigan (Benton Harbor) and would be interested in them.
Best regards,
Andy
Let me know how much you want for these parts.
Thanks,
Marc
Are the center console parts still available?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)