Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ SOLD: 914 Parts Lot For Sale! $50 TAKE ALL!

Posted by: metalvolks Dec 20 2020, 01:23 PM

SOLD! SOLD! Hello everyone! Below is a complete list of 914 parts that I have for sale AS A LOT - I'm not really interested in parting pieces of it out any more.

I am looking to get $50 if you take everything listed below.

I have hundreds of photos organized on a webpage with the link below. Everything sold as-is. Please take a look at the site before you contact me. Disregard the prices on the site.

PICTURES OF ALL PARTS BELOW ARE HERE!
http://paulmichaelrogers.com/porsche914parts/

Available Parts List:

Engines/Engine Mechanical Parts:
Engine Tin (1/2 Side Tin - 3 1.7/1.8, (4 Rear Tin), (Misc. Tin). Condition ranges from fair to good.
Thermostat
2.0 Air Cleaner Housing - Surface Rust, but overall good condition
Cooling Shroud (Good Condition)
Muffler
A/C Compressor (York) Stock (unknown condition)
1.7 (2 sets)/1.8/2.1 Cylinders (90 (2 sets) /92/96mm) - 92mm Cylinders and 96mm Cylinders SOLD, Pistons and Pins (most cylinders in good shape-all need to be honed. A few pistons have gouges and nicks. Pins would need to be polished)
Pressure Plates
Camshafts
Crankshafts (Don't know for which motor)
Engine Support Cross Bars - early style, later style
1.7 & ('74 1.8) Muffler Bracket

Engine Electrical Parts:
Engine Compartment Heater Blower Motor (TESTED-WORKING)
1 Alternator (with Cooling Vent)

Interior/Mechanical:
Shifter
Seat Bracket

Interior:
Passenger Door Pulls
Driver Door Pocket (Blue)
A-Pillars - Poor to Fair Condition
Ash Tray
Driver Door Pocket Covers - Fair Condition
Rear View Mirror - Fair Condition (Glass Issues)
Upper Windshield Trim - Fair Condition
Carpet Sill Trim Lot
Seat Belt Receivers
Misc. Interior Vents
Dash Trim Plate - Very Straight
Center Console Shifter Panel/Trim/Cover & Defrost Switch
Console Box (Fair Condition)

Body/Electrical:
Tail Lights (2 lefts, 1 right) - Poor to Fair Condition (usable)
Front Turn Signal Housings - Fair to Good Condition
Horn
Headlight Motors
Headlight Assembly Lot - Fair Condition
Fog Light Grill - Poor to Fair Condition (2 Cracks)
A/C Evaporator, Fan and Enclosure DPD
Misc. Relays, Switches, Actuators (Unknown Condition)
Rear License Plate Lights

Body:
Rain Trays (2) - Both Have Small Cracks (can be fixed easily)
License Plate Bracket
Bumper Guards (Good Useable Condition)
Spare Tire Well Section

Brakes:
Front Backing Plates - Good Condition

Suspension:
Aftermarket Unknown Brand Springs - Very High Spring Rate it Appears (Pair)
Stock Rear Springs - 3 Red Stripes (2 Pair)
Spring Hats, Seats & Hardware (Lot)
Tie Rods
Front Suspension, uprights, spindles, backing plates, crossmember

Glass:
1969-1972 Driver's Window - Good condition
Rear Glass - Good condition

Misc.:
Fuel Tank
Fuel Tank Bumpers
Windshield Washer Bottles
Fuel Expansion Tanks (1 Plastic, 3 Metal)
Charcoal Canister (2)
Hood Springs and Hinges
Factory Lug Wrench

Thank you for looking!

Paul

SOLD parts list from this post:

SOLD - OEM Oil Cooler - Good Condition - $40
SOLD - Cooling Shroud w/Alternator - Good Condition (small crack) - $40
SOLD - 2.0 Passenger Heat Exchanger - fair condition - $80
SOLD - 1.7/1.8 Stainless Steel Heat Exchangers (smoke tested ok) - Great Condition - $650
SOLD - 1.7 Long Block with heat exchangers (Complete Engine minus carbs, intake, distributor. Unknown Condition, Spins Freely - $450
SOLD - 1973 1.8 EC Case, Crank, Rods, Cam and Oil Pump - Good Condition - $200
SOLD - OE Oil Pump - 021 115 109A - $30
SOLD - 2.0 Oil Pickup and Windage - $40
SOLD - 1.7/1.8 Heat Exchangers (smoke tested ok) - Good Condition - Surface Rust and Paint, but solid - $150
SOLD - 1.8 Heads - Good Condition (No Visible Cracks) - 021 101 371 S - $120 (Set)
SOLD - 2.0 Heads - Bare - 1 Head Great Condition (no cracks), 1 Head Machining Needed (Valve Seat Damage, 1 broken fin and 1 bent fin) - $250 (Pair)
SOLD - Flywheel - $40
SOLD - Connecting Rods - $40
SOLD - Smog Pump - $40
SOLD - Engine Parts Lot1 (rocker arms, lifters, pushrods, springs, gaskets, etc) - $50
SOLD - Early 2.0 Muffler Bracket - $20
SOLD - Bosch Blue Coil - $20
SOLD - Pedal Board (Decent Condition) - $40
SOLD - 1973 914 Rolling Shell - Mainly surface rust. Hellhole, Rockers, Longs, Floors, Battery Tray, etc. solid. Small hole in floor, battery tray, spare tire well and trunk. Left Rear Shock Tower Needs Replacement. Has suspension, 5 steel "sport wheels", passenger windows and mechanism, etc. - $600
Engine Compartment Covers - $40 (white one is SOLD)
SOLD - Engine Compartment Cover (Complete) With Rain Tray (Great Condition-No Dents) (Early Model) - $250
SOLD - Targa Top (Good-Usable Condition - small chip on corner - w/Front Latches) - $100
SOLD - Targa Top (Good Condition - w/ 1 Front Latch) - $125
SOLD - Front Hood (Great Condition - no dents, light surface rust, latch) - $125
SOLD - Dash Frame (Good Condition) - $80
SOLD - Front Bumper (Chrome Painted Black - Fair Condition) - Fairly straight with only a few dents- $80
SOLD - Rear Valance - poor to fair condition - $20
SOLD - Rear Calipers (Good Condition-Needs Rebuild) - $30/each
SOLD - Rear Backing Plates - Fair Condition - $15/each
SOLD - Weltmeister SP100 Rear Springs (Pair) - $60
SOLD - Wiper Arms Lot - $10
SOLD - 1 Alternator (with Cooling Vent) - $20
SOLD - Oil Filter Mounting Console - $15

Posted by: rcarson25 Dec 20 2020, 03:16 PM

I know he is new here at 914world, but I have known Paul for years. He is a good guy and good seller so you can buy with confidence.

Posted by: 914sgofast2 Dec 21 2020, 12:04 PM

PM sent for 1.8L heads, oil pickup & windage teay, oil pump, and passenger door pocket.

Posted by: frostyf Dec 21 2020, 12:23 PM

Hi Paul, PM'd you about weltmeister SP100 Rear Springs (Pair) - $60
And bilstein shocks.

Nick

Posted by: porscheaddic Dec 21 2020, 12:31 PM

Hi Paul,

Sent you a pm regarding the rods, and rear brake calipers.

Thanks,
Vince

Posted by: jdbogart@self-serv.net Dec 21 2020, 03:55 PM

Hi Paul -
I'm looking for the D-ring with the short fabric strap that leads to underneath the speaker housing. It would be for a 1970-71 914 removable footrest. Opposite the D-ring on the strap would probably be a hole for a speaker housing screw to go through.
Thanks
Don

Posted by: metalvolks Dec 21 2020, 04:40 PM

QUOTE(914sgofast2 @ Dec 21 2020, 10:04 AM) *

PM sent for 1.8L heads, oil pickup & windage teay, oil pump, and passenger door pocket.


PM Reply Sent!

Posted by: metalvolks Dec 21 2020, 04:40 PM

QUOTE(porscheaddic @ Dec 21 2020, 10:31 AM) *

Hi Paul,

Sent you a pm regarding the rods, and rear brake calipers.

Thanks,
Vince


PM Reply Sent!

Posted by: metalvolks Dec 21 2020, 04:40 PM

QUOTE(frostyf @ Dec 21 2020, 10:23 AM) *

Hi Paul, PM'd you about weltmeister SP100 Rear Springs (Pair) - $60
And bilstein shocks.

Nick


PM Reply Sent!

Posted by: metalvolks Dec 21 2020, 04:42 PM

QUOTE(rcarson25 @ Dec 20 2020, 01:16 PM) *

I know he is new here at 914world, but I have known Paul for years. He is a good guy and good seller so you can buy with confidence.


Thanks Ryan and thanks everyone for the interest in the parts. Please remember to view all the pictures for each part via the link I provided in the ad (I had so many pictures it would have been a nightmare to add them all to 914world). Click on each part and then click on each picture to view a high def picture.

Paul

Posted by: second wind Dec 21 2020, 04:58 PM

Hello Paul.....I would like dibs on the 2.0 stainless steel heat exchanger.....thank you very much.
gg

Posted by: metalvolks Dec 21 2020, 05:12 PM

QUOTE(second wind @ Dec 21 2020, 02:58 PM) *

Hello Paul.....I would like dibs on the 2.0 stainless steel heat exchanger.....thank you very much.
gg


Sorry, it just sold about an hour ago. I just removed it from the list.

Posted by: Ampex351 Dec 21 2020, 05:45 PM

Paul, I need that antenna off of the white 914 body. Complete with the rubber base.

Thanks, Roger

Posted by: metalvolks Dec 21 2020, 06:01 PM

QUOTE(Ampex351 @ Dec 21 2020, 03:45 PM) *

Paul, I need that antenna off of the white 914 body. Complete with the rubber base.

Thanks, Roger


PM Reply Sent!

Posted by: second wind Dec 21 2020, 10:31 PM

[quote name='metalvolks' post='2877018' date='Dec 21 2020, 03:12 PM']
[quote name='second wind' post='2877016' date='Dec 21 2020, 02:58 PM']

Posted by: metalvolks Dec 23 2020, 03:13 PM

Friendly bump smile.gif

Posted by: metalvolks Dec 27 2020, 11:08 PM

Another Friendly Bump!

Posted by: Ampex351 Dec 28 2020, 12:35 AM

QUOTE(metalvolks @ Dec 28 2020, 12:08 AM) *

Another Friendly Bump!


Paul, am I missing something?

Roger

Posted by: metalvolks Dec 28 2020, 01:17 AM

QUOTE(Ampex351 @ Dec 27 2020, 10:35 PM) *

QUOTE(metalvolks @ Dec 28 2020, 12:08 AM) *

Another Friendly Bump!


Paul, am I missing something?

Roger


Hi Roger - Nope! Just "bumping" this thread to the top of the list since there hasn't been activity on this thread in a few days.

Posted by: 930cabman Dec 29 2020, 05:42 PM

Are the rear calipers and backing plates available? If so, I will take them.
thank you

Posted by: metalvolks Dec 29 2020, 05:45 PM

QUOTE(930cabman @ Dec 29 2020, 03:42 PM) *

Are the rear calipers and backing plates available? If so, I will take them.
thank you


Backing plates, yes. I have someone coming tomorrow morning to pick up the calipers. I'll let you know tomorrow if they are still available or not.

Posted by: kkid Dec 29 2020, 06:57 PM

PM on its way for "Carpet Sill Trim Lot - $20"


Posted by: metalvolks Dec 29 2020, 07:12 PM

QUOTE(kkid @ Dec 29 2020, 04:57 PM) *

PM on its way for "Carpet Sill Trim Lot - $20"


PM Reply Sent!

Posted by: metalvolks Dec 30 2020, 11:15 AM

QUOTE(930cabman @ Dec 29 2020, 03:42 PM) *

Are the rear calipers and backing plates available? If so, I will take them.
thank you


Rear Calipers are sold - backing plates are available. I PM'd you.

Posted by: 930cabman Dec 30 2020, 11:55 AM

QUOTE(metalvolks @ Dec 30 2020, 12:15 PM) *

QUOTE(930cabman @ Dec 29 2020, 03:42 PM) *

Are the rear calipers and backing plates available? If so, I will take them.
thank you


Rear Calipers are sold - backing plates are available. I PM'd you.


I will take the backing plates and rear calipers if available.
Thank you

Posted by: metalvolks Jan 2 2021, 12:14 PM

QUOTE(metalvolks @ Dec 20 2020, 11:23 AM) *

Happy Sunday everyone! Below is a complete list of 914 parts that I have for sale. I have hundreds of photos organized on a webpage with the link below. PM me with what you want and a zip code for shipping! I can ship about anything or meet you here in San Diego county. Parts will be removed from my site once they are paid for. I'm flexible on most prices and can do discounts depending on how much you need. I can also trailer the 914 roller to you.

IPB Image

IPB Image

Parts List:

Engines/Engine Mechanical Parts
1975 2.0 GC Case - Good Condition - $500
1973 1.8 EC Case, Crank, Rods, Cam and Oil Pump - Good Condition - $500
OEM Oil Cooler - Good Condition - $40
Engine Tin (1/2 Side Tin - 3 1.7/1.8 $40/each, 3/4 Side Tin - 3 1.7/1.8 $40/each), (4 Rear Tin, $40/each), (Misc. Tin, $10-20/each). Condition ranges from fair to good.
Thermostat - $50
2.0 Air Cleaner Housing - Surface Rust, but overall good condition - $60
SOLD - OE Oil Pump - 021 115 109A - $30
Oil Filter Mounting Console - $30
SOLD - 2.0 Oil Pickup and Windage - $40
1.7/1.8 Heat Exchangers - Good Condition - Surface Rust and Paint, but solid - $250
1.7/1.8 Heat Exchangers - Fair Condition - Surface Rust - $200
1.7/1.8 Stainless Steel Heat Exchangers - Great Condition - $600
2.0 Heat Exchanger - Passenger Side - Good Condition - $125
SOLD - 1.8 Heads - Good Condition (No Visible Cracks) - 021 101 371 S - $120 (Set)
2.0 Heads - Bare - 1 Head Great Condition (no cracks), 1 Head Machining Needed (Valve Seat Damage, 1 broken fin and 1 bent fin) - $500 (Pair)
Cooling Shroud (Good Condition) - $200
Cooling Shroud w/Alternator - Good Condition (small crack) - $200
Stock Muffler/Exhaust - $100
Aftermarket Exhaust - $100
A/C Compressor (York) Stock (unknown condition) - $60
1.7 Long Block with heat exchangers (Complete Engine minus carbs, intake, distributor. Unknown Condition, Spins Freely - $900
1.7 (2 sets)/1.8/2.0 Cylinders (90/92/94mm), Pistons and Pins (most cylinders in good shape-all need to be honed. A few pistons have gouges and nicks. Pins would need to be polished) - $80/each set
Pressure Plates - $20/each, Flywheel - $40
SOLD - Connecting Rods - $40
Camshafts - $30/each
Crankshafts (Will have to measure to determine what size journals - Price TBD)
Smog Pump - $40
SOLD - Engine Parts Lot1 (rocker arms, lifters, pushrods, springs, gaskets, etc) - $50
Engine Parts Lot2 (motor mounts, etc) - $50
Engine Support Cross Bars - $80 for early style, $120 for later style
LATER STYLE SOLD - Muffler Brackets (Early and Later Style) - $20/each

Engine Electrical Parts
SOLD - Bosch Blue Coil - $20
Heater Blower Motors - $100/each
Relay Board - $50
Alternator (with Cooling Vent) - $40

Transmission Parts
Shift Rod Linkages (3) - $25/each ($0 for broken one)

Interior/Mechanical
Shifter - $75
Seat Bracket - $80

Interior
Passenger Door Pulls - $30/each
Driver Door Pocket (Blue) - $20
A-Pillars - Poor to Fair Condition - $20/set
Ash Tray - $20
Driver Door Pocket Covers - Fair Condition - $20/each
Rear View Mirror - Fair Condition (Glass Issues) - $20
Upper Windshield Trim - Fair Condition - $20
Carpet Sill Trim Lot - $20
Seat Belt Receivers - $25/each
Misc. Interior Vents - $20
Pedal Board (Decent Condition) - $40
Dash Trim Plate - Very Straight - $50
Center Console Shifter Panel/Trim/Cover & Defrost Switch - $60
Console Box (Fair Condition) - $30

Body/Electrical
Tail Lights (2 lefts, 1 right) - Poor to Fair Condition (usable) - $30/each
Front Turn Signal Housings - Fair to Good Condition - $25/each
Horn - $20
Fresh Air Box and Fans - $150/each
Windshield Wiper Motors (5) and Linkage (3) - $40/each
Headlight Assembly Lot - Fair Condition - $60
Fog Light Grill - Poor to Fair Condition (2 Cracks) - $20
A/C Evaporator, Fan and Enclosure DPD - $50
Misc. Relays, Switches, Actuators (Unknown Condition) - $20
Rear License Plate Lights - $20

Body
1973 914 Rolling Shell - Mainly surface rust. Hellhole, Rockers, Longs, Floors, Battery Tray, etc. solid. Small hole in floor, battery tray, spare tire well and trunk. Left Rear Shock Tower Needs Replacement. Has suspension, 5 steel "sport wheels", passenger windows and mechanism, etc. - $800
Engine Compartment Covers - $80/each
Engine Compartment Cover (Complete) With Rain Tray (Great Condition-No Dents) (Early Model) - $250
Rain Trays (2) - Both Have Small Cracks (can be fixed easily) - $100/each
Targa Top (Good-Usable Condition - w/Front Latches) - $200
Targa Top (Good Condition - w/ 1 Front Latch) - $150
Front Hood (Great Condition - no dents, light surface rust, latch) - $150
Dash Frame (Good Condition) - $80
Front Bumper (Chrome Painted Black - Fair Condition) - Fairly straight with only a few dents- $100
Windshield Trim (Poor Condition - Mostly Bent) - $0
License Plate Bracket - $20
Bumper Guards (Good Useable Condition) - $40
Bumper Rubbers - Fair Condition - $80
SOLD - Rear Valance - poor to fair condition - $20
Spare Tire Well Section - $20

Brakes
SOLD - Rear Calipers (Good Condition-Needs Rebuild) - $30/each
Backing Plates - Fair Condition - $15/each

Suspension
Aftermarket Unknown Brand Springs - Very High Spring Rate it Appears (Pair) - $50
SOLD - Weltmeister SP100 Rear Springs (Pair) - $60
Stock Rear Springs - 3 Red Stripes (2 Pair) - $30/each pair
Stock Rear Springs (Pair) - $30
Spring Hats, Seats & Hardware (Lot) - $25
Rebuildable Rear Bilsteins? 2 of them seem to work ok - $20/all
Tie Rods - $20/all
Front Suspension, uprights, spindles, backing plates, crossmember - $150

Misc.
Fuel Tank - $50
Fuel Tank Bumpers - $10/each
Windshield Washer Bottles - $20/each
Fuel Expansion Tanks (1 Plastic, 3 Metal) - $30/each
Wiper Arms Lot - $30
Charcoal Canister (2) - $20/each
Hood Springs and Hinges - $40
Factory Lug Wrench - $20

Thank you for looking!

PICTURES ARE HERE!
http://paulmichaelrogers.com/porsche914parts/

Paul


Happy New Year! I've updated a few prices and I can ship almost everything on the list. Let me know what you need!

Posted by: metalvolks Jan 4 2021, 03:10 PM

Happy Monday bump. Anyone need parts?

Posted by: 930cabman Jan 4 2021, 03:15 PM

QUOTE(metalvolks @ Jan 4 2021, 04:10 PM) *

Happy Monday bump. Anyone need parts?


Yes, do you have brake calipers?

Posted by: metalvolks Jan 4 2021, 03:20 PM

QUOTE(930cabman @ Jan 4 2021, 01:15 PM) *

QUOTE(metalvolks @ Jan 4 2021, 04:10 PM) *

Happy Monday bump. Anyone need parts?


Yes, do you have brake calipers?


No, they have been sold.

Posted by: metalvolks Jan 7 2021, 03:45 PM

Thursday Bump! New prices added. Plenty of great parts left.

Posted by: 930cabman Jan 7 2021, 05:55 PM

QUOTE(metalvolks @ Jan 4 2021, 04:10 PM) *

Happy Monday bump. Anyone need parts?


Make me a smokin deal: four decent 94mm cylinders, two rear backing plates and a pedal board.

Any decent fog lamps?
thank you

Posted by: MFejsa Jan 10 2021, 02:47 PM

Hi Paul, do you still have the 2.0 passenger heat exchanger? If so, will you do for for $50 as I need to ship to Saudi Arabia which will cost me? Regards Michael

Posted by: type47fan Jan 11 2021, 12:39 AM

Hi Paul,

PM sent for smog pump.

Thanks,
Wayne

Posted by: Thierry Jan 12 2021, 03:40 PM

Any chance you've got a fog switch available?

Posted by: 930cabman Jan 12 2021, 04:26 PM

QUOTE(930cabman @ Jan 7 2021, 06:55 PM) *

QUOTE(metalvolks @ Jan 4 2021, 04:10 PM) *

Happy Monday bump. Anyone need parts?


Make me a smokin deal: four decent 94mm cylinders, two rear backing plates and a pedal board.

Any decent fog lamps?
thank you


Any of the above?

Posted by: metalvolks Jan 12 2021, 06:26 PM

QUOTE(MFejsa @ Jan 10 2021, 12:47 PM) *

Hi Paul, do you still have the 2.0 passenger heat exchanger? If so, will you do for for $50 as I need to ship to Saudi Arabia which will cost me? Regards Michael


Hi Michael - I just PM'd you!

Paul

Posted by: metalvolks Jan 12 2021, 06:28 PM

QUOTE(type47fan @ Jan 10 2021, 10:39 PM) *

Hi Paul,

PM sent for smog pump.

Thanks,
Wayne


You have a PM as well!

Paul

Posted by: metalvolks Jan 12 2021, 06:29 PM

QUOTE(Thierry @ Jan 12 2021, 01:40 PM) *

Any chance you've got a fog switch available?


Unfortunately, no, I do not. About 99.5% of the parts I have are listed with pictures on the site provided in the ad.

Paul

Posted by: metalvolks Jan 12 2021, 06:30 PM

QUOTE(930cabman @ Jan 12 2021, 02:26 PM) *

QUOTE(930cabman @ Jan 7 2021, 06:55 PM) *

QUOTE(metalvolks @ Jan 4 2021, 04:10 PM) *

Happy Monday bump. Anyone need parts?


Make me a smokin deal: four decent 94mm cylinders, two rear backing plates and a pedal board.

Any decent fog lamps?
thank you


Any of the above?


I just PM'd you. Sorry for the delay.

Paul

Posted by: metalvolks Jan 15 2021, 01:00 PM

Sold the 914 roller I had and a few other parts. Plenty of good parts left. I can ship about anything I have. Bump!

Posted by: metalvolks Jan 18 2021, 12:37 PM

Monday Bump!

Posted by: metalvolks Jan 21 2021, 01:25 PM

Bump!

Posted by: metalvolks Jan 23 2021, 04:55 PM

Happy Saturday bump! Great parts still available...ready to ship.

Posted by: metalvolks Feb 10 2021, 01:50 PM

Bump! New prices, lower prices! Please let me know what you need.

Posted by: metalvolks Feb 18 2021, 08:21 PM

Happy almost Friday bump! I still have lots of good parts left. Let me know what you need from this list!

Posted by: metalvolks Feb 28 2021, 08:00 PM

Bump!

Posted by: metalvolks Mar 7 2021, 03:57 PM

Bump! Great parts available.

Posted by: metalvolks Mar 13 2021, 12:32 AM

BUMP!

Posted by: cantley914 Mar 16 2021, 02:13 PM

Hi Paul, do you have a motor mount part#039199231 in very good to excellent condition?
Attached Image

Posted by: rbzymek Mar 16 2021, 02:25 PM

Greetings. Can you tell me about the mufflers? I need a stock muffler that will work with 2.0 SS HE's. Thanks.

Posted by: metalvolks Mar 16 2021, 03:31 PM

QUOTE(rbzymek @ Mar 16 2021, 12:25 PM) *

Greetings. Can you tell me about the mufflers? I need a stock muffler that will work with 2.0 SS HE's. Thanks.


Hi! I actually don't know which exhaust is for what, but, below is what I have. If your are interested in any of the parts listed in the ad, go to the website that hosts all the pictures of each part: https://paulmichaelrogers.com/porsche914parts/

IPB Image
IPB Image
IPB Image

Posted by: metalvolks Mar 16 2021, 03:44 PM

QUOTE(cantley914 @ Mar 16 2021, 12:13 PM) *

Hi Paul, do you have a motor mount part#039199231 in very good to excellent condition?
Attached Image

I'll take a look tonight. Stay tuned.

Posted by: rbzymek Mar 16 2021, 03:50 PM

QUOTE(metalvolks @ Mar 16 2021, 05:31 PM) *

QUOTE(rbzymek @ Mar 16 2021, 12:25 PM) *

Greetings. Can you tell me about the mufflers? I need a stock muffler that will work with 2.0 SS HE's. Thanks.


Hi! I actually don't know which exhaust is for what, but, below is what I have. If your are interested in any of the parts listed in the ad, go to the website that hosts all the pictures of each part: https://paulmichaelrogers.com/porsche914parts/

IPB Image
IPB Image
IPB Image


Doesn't look compatible. Thanks.

Posted by: cantley914 Mar 18 2021, 06:20 AM

QUOTE(metalvolks @ Mar 16 2021, 01:44 PM) *

QUOTE(cantley914 @ Mar 16 2021, 12:13 PM) *

Hi Paul, do you have a motor mount part#039199231 in very good to excellent condition?
Attached Image

I'll take a look tonight. Stay tuned.

Any luck

Posted by: Tdskip Mar 18 2021, 08:08 AM

Had a chance to pick up my parts last weekend, good experience.

Thanks!

Posted by: metalvolks Mar 20 2021, 02:29 PM

QUOTE(cantley914 @ Mar 18 2021, 05:20 AM) *

QUOTE(metalvolks @ Mar 16 2021, 01:44 PM) *

QUOTE(cantley914 @ Mar 16 2021, 12:13 PM) *

Hi Paul, do you have a motor mount part#039199231 in very good to excellent condition?
Attached Image

I'll take a look tonight. Stay tuned.

Any luck


Just took a look. No, nothing good. Sorry.

Paul

Posted by: metalvolks Mar 22 2021, 06:36 PM

Happy Monday everyone! I have updated this post as a complete parts lot for sale. If you are in SoCal and interested in the lot, please let me know. $100 for everything listed!

I am interested in getting the lot sold in the next few weeks. Plenty of great parts left.

Posted by: metalvolks Mar 30 2021, 07:51 PM

New price bump! I'm looking for these parts to go to a good home here. $50!

Posted by: scottthephotog Apr 1 2021, 06:06 PM

Sent PM!

Posted by: metalvolks Apr 1 2021, 07:42 PM

QUOTE(scottthephotog @ Apr 1 2021, 05:06 PM) *

Sent PM!


Sent PM reply!

Posted by: metalvolks Apr 12 2021, 09:05 AM

Parts lot sold! Thanks porscheaddic!

The only item I have left is a bare 2.0 GC Case...

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)