Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ 914-6 conversion package oil tank and sheet metal
Posted by: mb911 Jan 13 2021, 07:22 PM
I am offering 2 kits to get your conversion folks started off right.
Includes one of my aluminum oil tanks and a set of restoration designs stamped engine sheet metal. The sheet metal retails at $1000 and my tanks are $700 retail . Offering these as a spring deal. $1200 shipped for the pair. Attached are just stock pictures. The sheet metal is with holes for heat. 
Posted by: mb911 Jan 15 2021, 06:01 AM
Bump
Posted by: 914Sixer Jan 15 2021, 01:52 PM
I sure wish I was doing a conversion. Smoking deal 
Posted by: burton73 Jan 15 2021, 04:13 PM
If I was doing a conversion I would be all over this. Today great deal!
Great work Ben.
Bob B
Posted by: mb911 Jan 18 2021, 04:18 PM
Still available and ready for immediate shipment
Posted by: 930cabman Jan 26 2021, 07:25 AM
Looks like a great deal, I am building an inventory for a future -6 build. It will be a 2.7. With the tin furnished with your kit, is it a proper fit into the engine bay, or what else is required?
thank you,
Posted by: mb911 Jan 26 2021, 08:33 AM
Looks like a great deal, I am building an inventory for a future -6 build. It will be a 2.7. With the tin furnished with your kit, is it a proper fit into the engine bay, or what else is required?
thank you,
It fits perfectly in the factory opening. You will have to modify for the carrera tensioners if you have those otherwise your all set. Paint and bolt on.
As to the tank you have to drill holes and properly layout from the tank, then bolt in
Posted by: 930cabman Jan 27 2021, 05:33 PM
Looks like a great deal, I am building an inventory for a future -6 build. It will be a 2.7. With the tin furnished with your kit, is it a proper fit into the engine bay, or what else is required?
thank you,
It fits perfectly in the factory opening. You will have to modify for the carrera tensioners if you have those otherwise your all set. Paint and bolt on.
As to the tank you have to drill holes and properly layout from the tank, then bolt in
Don't tell anybody, but sign me up, check your PM
Thanks
Posted by: yostcorners Jan 29 2021, 10:19 AM
I am offering 2 kits to get your conversion folks started off right.
Includes one of my aluminum oil tanks and a set of restoration designs stamped engine sheet metal. The sheet metal retails at $1000 and my tanks are $700 retail . Offering these as a spring deal. $1200 shipped for the pair. Attached are just stock pictures. The sheet metal is with holes for heat.
I will take these parts if still available. Thanks, Jon Yost. 404 838 7444.
Posted by: mb911 Jan 29 2021, 12:53 PM
Jon,
I can have one more setup ready for you on Monday. Pm your details and I will send an invoice.
Posted by: 930cabman Jan 29 2021, 04:11 PM
I am offering 2 kits to get your conversion folks started off right.
Includes one of my aluminum oil tanks and a set of restoration designs stamped engine sheet metal. The sheet metal retails at $1000 and my tanks are $700 retail . Offering these as a spring deal. $1200 shipped for the pair. Attached are just stock pictures. The sheet metal is with holes for heat.
I will take these parts if still available. Thanks, Jon Yost. 404 838 7444.
Welcome aboard, I have been connected with the 914 World for a short time and everyone has been very helpful. I also am starting down the /6 conversion road.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)